In the rapid development of rapid, there are many people have a certain understanding of Fl Multiple-Stage Classifier In Series of Pine Granule, and crusher technology is in an absolute leader in the industry.
Fl Multiple-Stage Classifier In Series of Pine Granule should be installed in place to use convenient place in the site. Before you work, you should pick up the processed material, no metal, stone, etc., hard substances, mix into the machine, so as not to damage the parts in the machine or failure. Check that each component is firm and reliable before booting. Everything is normal, you can work on the power, turn it in 1-2 minutes, check whether the operation is normal, everything is normal, it can be pushed. When working, the operator cannot leave. Once the sound is abnormal, the power should be disconnected immediately. When machining raw new friends Chinese medicine crusher, the discharge port should be tiered with a long cloth bag. When the pulverizer is in use, if you encounter a power supply voltage, do not use it, so as not to damage the motor. When the power supply voltage is normal, the machine is not easily damaged, and the production efficiency is high.
How to correctly operate Fl Multiple-Stage Classifier In Series of Pine Granule? Before the device is turned on, the connection site, sealing and line, etc., everything can be run after the problem Powder classifier. The boot should be operated in the boot order. 3 minutes before the shutdown should be stopped, then shut down, and the order is opposite to the boot order. The amount of feed should be determined according to the size of the powder grading machine load, ensuring that the host is in the state of rated load. The fineness of the particles can be adjusted to adapt to the grading requirements. Depending on the heat-sensitive material, the device is separated, then the power of the main motor is slightly lower than the rated power. The size of the air volume in the delivery line can be achieved by adjusting the damper of the fan.
