Fl Multiple-Stage Classifier In Series for Calcium Carbonate will rise, when the temperature of the working fluid is too high, the flow rate of the gas will increase. Taking air as an example, the critical speed at room temperature is 320 m / sec, and when the temperature rises to 480 ° C, the critical speed can be increased to 500 m / sec, that is, the kinetic energy increases by 150%. Therefore, increasing the temperature of the working fluid is conducive to improving pulverization. The pressure of the working fluid is the main parameters of the jet speed, but also the main parameters affecting the fineness of the break. Typically, the higher the pressure of the working fluid, the faster the speed, the greater the kinetic energy. When the titanium powder is pulverized by overheating steam, the vapor pressure is typically from 0.8 to 1.7 MPa, and generally the pulverized calcined material is high, and the material after the pulverized surface is low.
FL Multiple-Stage Classifier In Series for Calcium Carbonate is a very important part, which introduces the maintenance method for Fl Multiple-Stage Classifier In Series for Calcium Carbonate. 1. When the machine is started or started, the appropriate amount of grease should be applied to ensure its life. 2. Check if the screws and nuts of each component are fastened. Check if the belt is stuck, whether it is tight. 3, regularly check the reliability of the equipment, prevent accidents or accidents. 4. The direction of operation of the spindle should be correct. If it is incorrect, it should be handled in time to avoid damage to the machine. 5, equipment maintenance should be carried out by professional and technical personnel, other people must not be carried out to avoid damage to the equipment. 6, electrical components and lines should be checked regularly, whether it is intact, whether the ground is reliable. 7. The equipment should be cleaned in time to prevent the next use to avoid contamination materials.
