Horizontal Air Classifier for FishBone is suitable for smashing machines of materials such as synthetic resins, food, chemicals. The apparatus is different from the ordinary inner grinding machine, not only simply crushed such as impact force and cutting force, but also by many generated ultrasonic eddy currents and vibration thus produced high frequency pressure vibration to crush the material. Under certain conditions, the viscous material and the elastic material can also be pulverized. The pulverizer has little increase in the cyclic temperature during the pulverization process, so the thermal material can also be pulverized. The pulverizer has a reasonable structure, stable operation, low energy consumption, large crushing capacity, small size, no fault, easy to clean, and maintenance. Generally, the outer casing uses water cooling and its own air volume, conveying crushing material, improves the temperature, and reducing the thermal material. The wear of the blade is caused by a large amount of ultrasonic vortex generated by the back of the blade and the vibration of the high frequency pressure. Compact structure, no dust, no problem.
Horizontal Air Classifier for FishBone, also called ultrassine pulverizer, before the invention, the principle of the device is to use the compressed air by the feed injector, with the pulverized material, multiple high-speed flow drive jets and pulverize everything Methods The nozzle of the wall of the crushing effect, control the wear weight by adjusting the depth of grinding the grinding front room, vertically or adjusting the feed speed.
In the production process, we should pay attention to maintenance and maintenance of Horizontal Air Classifier for Fishbone. 1. In the production process, the bearing temperature should be checked regularly. When the temperature rises above 50 degrees Celsius, the machine should be stopped to find out the cause and troubleshoot. 2, when the new machine is running, the transmission belt is easily elongated. Pay attention to adjust the appropriate tightness of the belt to ensure the life of the belt. 3, should be checked regularly, replace it in time, and ensure quality and production. 4, should check the wear of the blade and lining periodically. If the productivity is lowered after the wear, the grain size is thicker and the wear is immediately replaced. 5, the host and the hierarchical flow bearing use grease lubrication. 6, the replacement period of the bearing is 2000 hours, the amount of grease is 1/2 or 3/4 (lower test) of the bearing cavity space cannot be filled with too much fat. Otherwise, the temperature of the bearing will be too high. 7, spiral feeder changeThe fat period is 4,000 hours, coupled with ordinary calcium based grease. 8, in the output shaft E, i.e., pulley E, avoid heavy hush, damage to the part. 9. It is strictly forbidden to turn the handle of the handwheel in the stop. 10. The lubricating oil used by the governor adopts N32 alkaline high-zinc high anti-milling oil, and the reducer uses 401 universal lubricants and cannot be replaced by other machines. 11. After 3000 hours, the new oil should be replaced, and then used after 500 hours of the second oil, then use it after 1000 hours.
ALPA also believes that future airflow crushing technologies will become better and better, users who need to purchase such products can contact us.
