Single Classifying Wheel Classifier for SALT Working Principle: Airflow Crusher and Cyclone Separator Air Machine Mechanism into a complete combined system, compressed air is filtered and dried, then The crushing chamber is entered at high speed through the Raval nozzle at a plurality of high pressure air interchange. stream. The material is repeated collision, friction and shear, and the pulverized material is pulverized in the fan pumping force. Under the action of the high-speed rotary classifier, the fine particles that satisfy the particle size required by the grading wheel with the thickness and fine product separation into a t-cyclonic separator and dust collector by the grading wheel with the thickness, fine particles required to satisfy the particle size. Particles and continue to break in the crush region. High-pressure gases (compressed air, superheated steam or other gases) injected around the broken chamber and the high-speed air flow consisting of solid particles in the crushing chamber are subjected to the tangential impact of the air flow injected from different angles, so that the solid particles are mixed in the mixed airflow. Mutual collision and friction and refine.
Single Classifying Wheel Classifier FOR SALT silo does not small due to simple analysis, the material is stacked in the silo plate knot, the material suction cake, the material appears in the silo, the silo cone angle The reasons for the rest of the reference materials without reference materials. Solving silo does not smoke suggests design phase to fully understand the properties of material, such as pile specific gravity, liquidity, moisture resistance, rest horn, particle size, flammable and explosive. Adding auxiliary measures, such as air disc, a hammer, air blowing, vibrating mitigation mechanism, artificial beats, etc. The pulverizer is an apparatus for ultrafine pulverized dry materials with air separation, heavy polishing, and shear. It consists of a cylindrical crushed chamber, a polishing wheel, a polishing rail, a fan, a material collection system, and the like. The material enters the cylindrical pulverizing chamber by the feed opening, and is crushed by the polishing wheel that is circumferential movement along the grinding rail, and dissensibly. The pulverized material brings out the pulverizer through the negative pressure air flow caused by the fan, into the material collection system, filtered through the filter bag, the air is discharged, the material, the dust is collected, and the pulverization is completed. Single Classifying Wheel Classifier for Salt is one of the key components. It is often encountered in actual use. For example, the silo is not affected, and the feeding is not uniform.Even if you can't feed. Simple analytical materials with unevenness of feeding are more sticky or fluidity, and the feeding system design is defective. Feeding uneven solution recommendations According to the material properties of materials, such as silhouette structures, auxiliary sheet structures, feed valve structures, auxiliary feed, and ventilation and control systems. The feeding system is generally silo, auxiliary tablet equipment, and feeding mechanism three parts, depending on the properties of material, the design parameters of the feeding system are different. The above is the use of the use of Single Classify Wheel Classifier for Salt products and simple solutions. Everyone must pay more attention when using it.
ALPA is a research and development of research and sales of ultra-fine classifiers, precision grading machines, laboratory grades, and is committed to classifying machines. It is welcome to come to cooperate with friends.
