In the rapid development of the region, many people have a certain understanding of Horizontal Air Classifier With Polyethylene Terephthalate, crusher technology is in an absolute leading position in the industry.
Horizontal Air Classifier With Polyethylene Terephthalate is mainly used for more refined materials. The fractional particle size is 1.5 to 0.005 mm, and the crude material is sieved. The principle of pulverization is substantially the same as the hydraulic level, and the above settlement theory can also be used for airflow classification. However, in the airflow classification, since the density and viscosity of the air are much smaller than the density and viscosity of water, the same particles are more settled in the air than in the water. Moreover, the density and viscosity of the air vary with temperature and pressure. In order to cause air flow, wind grading equipment typically requires an appropriate fan (exhaust or blast). When the airflow is classified, the fine particles are usually taken away by the airflow. In some cases, the feedstock is sent to the grading device with the airflow. It is well known that the load of solid particles in the air under normal pressure does not exceed 500 g / m3 air. When it reaches 1 kg / m3, the particles fall from the airflow. The load is related to the density and particle size of the particles. When the fine particle material is treated, the load generally does not exceed 200 to 300 g / 3 air. According to this calculation, the volume concentration in the gas stream is much smaller than 0.03. Therefore, when the airflow is classified, in most cases, it belongs to the free settlement. The speed required to move the particulate material in the horizontal and vertical directions is relatively large, and the speed required in the horizontal direction is relatively large, and as the particle density increases, for example, for puls with a density of 1.5. Gram / cubic centimeter. The minimum wind speed is 2 m / sec; a powder material having a density of 2.5 g / cm, the speed is not less than 3.5 m / sec; a powder having a density of 4 g / cm 3, a minimum speed of 4 meters per second. Due to the complexity of the situation, the appropriate airflow rate in each particular situation should be determined by experiments. In the rising airflow, the water flow rate required to suspend a certain density and particle size is greater than the calculated value of the free settling, which is due to the uneven distribution of the airflow along the graded chamber portion. Horizontal Air ClassifThe Ier With Polyethylene TerephThalate has the characteristics of high grading range, high grading efficiency, high level precision, accurate cut particle size, and good stability.Horizontal Air Classifier With Polyethylene Terephthalate features ultrafine pulverization for dry powder materials. The impact is large, up to 2.5 Mach. General materials are easily crushed to 1-10 microns. 2. Relative fluidized bed gas flow pulverizer has a good crushing effect on viscous materials, and the crushing process does not generate clogging materials that cannot be pulverized. 3, heating, grinding process due to compressed gas nozzles, temperature drop, no mechanical friction, the grinding process does not warm, break, suitable for low-melting thermal sensitive materials. 4, easy equipment, convenient cleaning, convenient operation and maintenance, small area, low noise, no vibration, and so on.
How to install Horizontal Air Classifier with polyethylene terephthalate, the following content hopes to help you. 1. Chinese medicine shredder should be more smooth and easier to use. 2. Before working in traditional Chinese grinding machines, a clean processing material must be selected. Hard metal, such as metal or stones, can not be mixed into the machine, so as not to damage parts or faults. 3. Before the machine is opened, check whether the components of the machine are firm and reliable. Everything is normal, so you can work. 4, turn on the power, turn for 1-2 minutes, check whether the operation is normal, normal conditions, can put the material. When the crusher is working, the operator cannot leave. Once the sound is abnormal, the power supply should be disconnected immediately. In the new pulverizer raw material, the exit is fixed with a long bag. 5. When using the pulverizer, if the power supply voltage is too low, do not use it to avoid damage to the motor. The power supply is used normally, it is not easy to damage, and the production efficiency is high.
The above is the relevant content of Horizontal Air Classifier With Polyethylene Terephthalate, which is provided by Shandong ALPA Powder Technology Co., Ltd. The company has consistently follow the management of the standard, put the quality in the first production and service policy, and provide the products that are assured and the weighing crusher products andservice.
