Single Classifying Wheel Classifier Of Basalt is a very convenient device that can be used to crush all kinds of products, especially some fine particle products need to be used.
With the continuous social demand Increase, Single Classifying Wheel Classifier of BasalT's performance, product quality, etc. face huge challenges. Therefore, ALPA Technology Co., Ltd. persisted unremitting, continuously improving the ultrafine grade strength, particle size distribution, particle crystal form and other regulation and control technology to achieve more production. AlPa, strive to achieve low-energy consumption, high production, high yield, non-pollution, achieve good granularity, dispersion, unique and potential performance of the product, improve the competitiveness of powder classifier, enhance environmental protection and low power performance .
During the production process, the temperature rise of the bearing must often be checked, and when the temperature rise exceeds 50 ° C, it should be closed, and the reason is to rule out the fault. When the new machine is running, the transmission belt is easy to elongate, pay attention to adjust the appropriate looseness of the belt to ensure the work life of the belt. If you want to check, you should replace production quality and production in time. Blades, the lining should often check the wear situation. If the wear is worn, the productivity decreases, and the particle size is replaced after the particle size is replaced. The host and the grading flow bearing are lipids, and the 2nd special lipid is used. The replacement period of the bearing is around three months, and the filling of the grease is 1/2 of the outer space space in the bearing cavity. Do not fill the grease. Otherwise It will cause too high of the bearing temperature. The spiral feeder has changed the lime than half a year, and the calcium-based grease is added. In the output shaft E, ie the pulley E, avoiding heavy hammer, damage the part. It is strictly forbidden to turn the handle on the stop. The lubricating oil used in this regulator is used with N32 alkaline high-z7-degree anti-motor oil pressure oil, and the deceleration machine is used 401 generally lubricating oil, and it is not necessary to use other machines. After four or five months, new oil should be replaced.
Today, the knowledge of Single Classifying Wheel Classifier Of Basalt, introduces you here, want to learn more, please continue to pay attention to our website.
