Single Classifying Wheel Classifier of Metallic Silicon and cyclonic separators, dust collectors and air machines have become a complete crushing system. After filtration of compressed air is dried, the high-speed nozzle is sprayed into the pulverized chamber, repeated collision, friction and shear at the intersection of the plurality of high pressure airflows, and pulverized the material. The crushing material moves from the rising airflow to the hierarchical region under the suction of the fan, generating a strong centrifuge generated by a high speed rotation. Under force, the fine particles are separated, and the cyclone and dust collectors are collected by the granular particles, and the coarse particles fall into the pulverized region to continue to be pulverized.
Let's take a look at the maintenance tips for eddy current pulverizer transmission chains! Crusher Transmission Chain Protective Hoods should be intact, preventing personal injury accidents in the work in the work. Motor base fastening bolts To regularly check, the foundation must have sufficient steel, preventing the chain from joking or falling down due to the basis, causing drive failure. Check, repair, and maintenance of the machine, the power supply must be cut off and the sign is cut. It is strictly forbidden to extend the hand or other tools into the machine during the machine operation. Only after the machine is completely stopped, it can clean and check the machine. The cable in the pulverizer should have a protective casing. During the operation, at least the compressed air line is leaking, and the water water separation is discharged once in the three joints. Check if the unloading door is leaking weekly, whether the sealing strip is damaged, whether the unloading link mechanism is in a dead position. Clean the residual material attached to the inner wall of the bucket once a week. Wash the chain, sprocket, and refresh the chain sprocket with diesel brushing each month. Clean the injector of the inner wall of the mixer and the residual attachment material on the inner wall of the mixer and the cover. Monthly measurement of the variation coefficient of the exit and the finished package port of the finished mixer, the determination of the variation coefficient should select the shortest mixed product. In addition, users also need to check whether the wire connection in the motor junction box is loose. Clean the residual materials attached to the inner wall of the mixer and buffer. Clean up the oil and water separation of three linkages to ensure smooth air paths.
The company produces a variety of Single Classifying Wheel Classifier of Metallic Silicon andAirflow mill, complete test means and sample equipment and laboratory equipment, produced pulverizer widely used in chemical, pharmaceutical, minerals, electronics, pesticides, ceramics and other industries. To purchase products, please contact us.
