Vertical Air Classifier for Calcium Carbonate is a mechanical equipment applied to the production area, which is mostly used in pulverizing particles, fast pulverity, good accuracy.
Vertical Air Classifier for Calcium Carbonate Work: Airflow Crusher and Cyclone Separator Drainage Machine Machine Map into a complete crushing system, compressed air is filtered and dried, then passed through the Lavar nozzle to enter the crushing room at high pressure air intersection . stream. The material is repeated collision, friction and shear, and the pulverized material is pulverized in the fan pumping force. Under the action of the high-speed rotary classifier, the fine particles that satisfy the particle size required by the grading wheel with the thickness and fine product separation into a t-cyclonic separator and dust collector by the grading wheel with the thickness, fine particles required to satisfy the particle size. Particles and continue to break in the crush region. High-pressure gases (compressed air, superheated steam or other gases) injected around the broken chamber and the high-speed air flow consisting of solid particles in the crushing chamber are subjected to the tangential impact of the air flow injected from different angles, so that the solid particles are mixed in the mixed airflow. Mutual collision and friction and refine.
Let me introduce you to the operation method of the Vertical Air Classifier for Calcium Carbonate. 1. Before using a pulverizer, first check whether all fasteners of the machine are tightened and the belt is fastened. 2. The spindle direction must be consistent with the direction of the arrow on the shroud, otherwise it may damage the machine and cause personal injury. 3. Check if the crusher is complete. 4. Check if the airflow pulverizer has a hard object such as a metal in a crushing room, otherwise it will damage the tool and affect the machine. 5. You must check the purity of the material before crushing. Metal hard materials are not allowed to avoid damage to the tool or cause combustion. 6. The oil cup on the machine should always note full lubricant to ensure that the machine is operating normally. 7. The feeding should be stopped before stopping. If you do not continue to use, remove the residers from the machine. 8. Regular inspection tools and screens are damaged. If damage is damaged, it should be replaced immediately. 9. There is a slight vibration when using the fuselage. Be sure to tighten the cover to connect the handle to avoid accidents.
Oversea of ALPA productionGrading machines, precision classifiers, etc., graded machine devices can be produced simultaneously for multiple particle size products. Welcome new and old customers to come to consult!
