Multiple-Stage Classifier In Series For Degrading Enzyme is a very convenient device that can be used to crush all kinds of products, especially some fine particle products need to be used.
Multiple-Stage Classifier In Series for Degrading Enzyme is convenient, easy to maintain, with high grinding speed in the same product. At the same time, low energy consumption is the lowest in similar products. Products having the same particle size do not have functional, flammability, explosive, and oxidative materials that have particulate formation and particle dispersion, and oxidative materials can be used as a medium to achieve a closed pulverization and inertia. Loss of use of sex gas circulation is very low. Negative pressure production can effectively reduce dust pollution, improve working environment, compact structure, seamless welding technology internally, easy to maintain mechanical maintenance and mechanical cleaning. Since the high pressure gas is ejected from the nozzle, the gas stream causes the animal material to collide, shear and rub, thereby achieving the crushing effect. Since the gas and the high speed of the animal material have a large centrifugal force. Under the effort of the heart, the crude particles were sent to the crushing room for multiple comminution, and the fine powder was discharged from the center exit.
During the production process, the temperature rise of the bearing must often be checked, and when the temperature rise exceeds 50 ° C, it should be closed, and the reason is to rule out the fault. When the new machine is running, the transmission belt is easy to elongate, pay attention to adjust the appropriate looseness of the belt to ensure the work life of the belt. If you want to check, you should replace production quality and production in time. Blades, the lining should often check the wear situation. If the wear is worn, the productivity decreases, and the particle size is replaced after the particle size is replaced. The host and the grading flow bearing are lipids, and the 2nd special lipid is used. The replacement period of the bearing is around three months, and the filling of the grease is 1/2 of the outer space space in the bearing cavity. Do not fill the grease. Otherwise It will cause too high of the bearing temperature. The spiral feeder has changed the lime than half a year, and the calcium-based grease is added. In the output shaft E, ie the pulley E, avoiding heavy hammer, damage the part. It is strictly forbidden to turn the handle on the stop. The lubricating oil used in this regulator is used with N32 alkaline high-z7-degree anti-motor oil pressure oil, and the deceleration machine is used 401 generally lubricating oil, and it is not necessary to use other machines. After four or five months, new oil should be replaced. "
Today, Multiple-Stage Classifier In Series For Degrading Enzyme is introduced to you, you want to know more information, please continue to pay attention to our website.
