Multiple-Stage Classifier In Series with Pesticides as a combined main equipment, the role is also growing, in the industrial sector of metallurgy, mine, chemical, cement, has a large number of raw materials and reuse each year. Waste is required to process processing with a classifier. In the coking plant, sintering plants, ceramics factories, glass industries, powder metallurgy, etc., need to break the raw materials to the particle size of the next job requirements. In the chemical, power sector, the hierarchy, the raw material is broken, grind, and increases the surface area of the material, has created favorable conditions to shorten the chemical reaction of the material.
Multiple-Stage Classifier In Series with Pesticides Main Features: 1 The distribution is narrow. It can be used in series with multi-stage classifiers and produces a product having multiple particle sizes. 2, the equipment is easy to disassemble, the inner wall is smooth, no dead angle. The entire system is closed, the dust is less, low noise, and the production process is clean and environmentally friendly. 3. The control system uses program control and easy to operate.
How to continue MULTIPLE-Stage Classifier In Series with psticides life? Here are the following aspects: 1. In the production process, the temperature rise of the bearing must be regularly checked. When the temperature rises to 50 ° C, the inspection should be checked, find a reason, and troubleshoot the fault. 2. When the new machine is running, the transmission belt is easily stretched, and the tightness of the belt should be adjusted to ensure the life of the belt. 3. Regularly check the lifting parts, promptly guarantee the quality of production and production. 4, blade and bushing should always check the wear situation. When wear, the productivity is lowered, and the grain is thick. 5, the host and gradient flow bearing oil grease lubrication, the use of special grease, and the degree of 265-295.6, and the change cycle of the bearing is 2000 hours. The amount of the grease is filled into a 1/2 (upper test) or 3/4 (below the test), so we can't add too much grease. Otherwise, the bearing temperature is too high. 7, the spiral feeder is 4,000 hours, plus ordinary calcium based grease.
