Hierarchical Cell Mill Factory can be used for important or need to be grounded to granular product processing, AlPA ultrafine pulverizer products are good, affordable, factory direct sales, also to promote after-sales maintenance services for customers, service attitude
[123 ] A Hierarchical Cell Mill Factory costs, if you want to use Hierarchical Cell Mill Factory for a long time, please pay attention to the following:
In the production process, the temperature rise of the bearing should be checked frequently. When the temperature rise exceeds 50 ° C, the examination should be stopped, find out the cause, and troubleshoot.
2. When the new machine is running, the transmission belt is easy to eliminate, so it should be noted to adjust the appropriate tightness of the belt to ensure the life of the belt.
3. Test and timely replacement of vulnerable parts should be performed in time to ensure quality and production.
4. The wear of the blade and bushing should be continuously checked. If the productivity is lowered, the particle size is thick after wear, and the wear is immediately replaced.
5.Hierarchical Cell Mill Factory host and level distribution bearing use 2 special grease (265-295 degrees) lubrication.
6. The replacement period of the bearing is 2000 hours, and the amount of oil filling of the bearing chamber gap is 1 ≤ 2 (try) or 3 ≤ 4 (try), if it is not too much, the bearing temperature It will be too high.
7. The replacement period of the spiral feeder is 4,000 hours, and ordinary calcium based grease is added. Standard operation to exchange for longer use of airflow crushers.
The above is a seven point introduction to the daily maintenance of Hierarchical Cell Mill Factory.
AlPa Trimage Material Hierarchical Cell Mill Factory Case Sharing: The company requires a three-dimensional material ultrafine pulverizer, and our Alpa's Hierarchical Cell Mill Factory is also relatively well-known. There is a lot of proportion in the industry. Through experiments, the company purchased a Hierarchical Cell Mill Factory of our company.
Technical parameters:
Finished granularity: D50: 10μm
Production capacity: 5-10kg / h
AlPa Design Hierarchical Cell Mill Factory equipment in actualIt has been a very good reputation in the production application, and it has also won the praise of users and friends.If you need to purchase Hierarchical Cell Mill Factory, please feel free to contact us.
