In the classification operation of the industrial production at this stage, the use of Ultrafine Crushing Vibration Mill Company is mainly targeted for the effective smash of solid particles, and is a commonly used comminution equipment in the ultrafine comminution process.
When the Ultrafine Crushing Vibration Mill Company screen material, the screen has good universality under the air pressure of the rotating duct. At the same time, under the gravity of the air blower, the screen collects the qualified material, and automatically discharges the material in the front cavity of the valve body by the unloading valve. The raw material powder driven by the compressed air is continuously supplied to the pulverizer without a rotating member. By accurate control of the airflow into three products: F fine powder, m powder and G coarse powder, and collected in subsequent cyclone dust collectors and dust collectors.
The material is driven by the blower of the airflow pulverizer. The lower end of the pulverizer is moved upward to the pulverization region, the strongest, and the strongest effluent is separated under a high speed rotary pulverized turbine. The fine particles that meet the particle size requirements are entered into the cyclone or dust collector by the gap of the pulverized wheel blade. After collecting, some of the thick particles of the fine particles disappear and drops along the cylinder wall to two air ports. The crude particles and fine particles are separated by strong purification of the two winds, and the fine particles rises twice as the grade region, and the crude particles fall to the discharge exit.
Welcome major There is a powder grading demand manufacturer, to the factory visit, incoming experiments.
