Rotor Crusher for Baked Wheat is well balanced, only need to be produced in a smooth ground, low noise, and avoid dust leakage during the pulverization process, which is favored by the powder industry.
Rotor Crusher for Baked Wheat should be installed in place in the venue.
Before working, it is necessary to pick up the processing material, no metal, stone, etc., the hard substances are mixed into the machine, so as not to damage the parts or failures in the machine. Check that each component is firm and reliable before booting. Everything is normal, you can work on the power, idle for 1-2 minutes, check whether the operation is normal, everything is normal, it can be pushed.
When operating, the operator cannot leave. Once the sound is abnormal, the power should be disconnected immediately.
When machining raw new friends Chinese medicine crusher, the discharge opening should be tied to the bag. When the pulverizer is in use, if you encounter the power supply voltage, do not use it, so as not to damage the motor. When the power supply voltage is normal, the machine is not easily damaged, and the production efficiency is high.
AlPa Phosphate Rotor Crusher for Baked Wheat Case Sharing: The customer's main business is the production and sales of special powder for rust-proof pigments and diamond tools industry. The raw material production and processing, new products are developed in one, with a production and sales enterprise of phosphate, such as mining, smelting, powder, and new materials.
Product particle size: Hour Yield: 80kg / h
In the production process, the temperature rise of the bearing must often be checked. When the temperature rise exceeds 50 ° C, it should be closed, check The reason is that the fault is excluded. When the new machine is running, the drive belt is easy to elongate, pay attention to adjust the proper looseness of the belt to ensure the work life of the belt. If the lifting piece should be checked frequently, replace the production quality and production in time. The blade, the bushing should often check the wear situation. If the wear is worn, the productivity decreases, and the particle size is roughly discovered to be replaced. The host and the grading flow bearing are lipomatic lubrication, using special lipids, the replacement period of the bearing is around three months, and the filling of the grease is 1/2 of the interior space in the bearing cavity. Otherwise, It will cause too high of the bearing temperature. The spiral feeder has changed the lipid period of half a year, and Cape Calcium-based grease. In the output shaft E, ie the pulley E, avoiding the weight of the weight, damage the part. It is strictly forbidden to turn the handle on the stop. The lubricating oil used in this regulator is used with N32 alkaline high-zinc high-grade anti-motor oil pressure oil, and the deceleration machine is 401 generally lubricating oil, and it is not necessary to use other machines. After four or five months, new oil should be replaced.
Shandong ALPA isA company with more than 20 years of research and development, produced, after years of precipitation and accumulation, experienced, and has multiple patented technologies.In the years, the airflow mill has been provided for domestic and foreign customers, there will be tens of thousands of equipment, often have a customer to order our products again, enough to explain the reputation of the Shandong AlPa airflow mill.Welcome to inquire!
