We all know that Rod Pin Grinder for NCA is a very strong airflow pulverizer, and many stubborn hard materials have been cut into a uniform block of blocks,
Rod Pin Grinder for NCA is used to crush the item, then the crushing items and tailings will also be discharged in time. When the crusher discharges these crushing items, there will be dust.
How do I solve if the dust is too big?
1. Install the dust collector: Generally, this dust collector can now be used with a crusher. It puts dust income trapping bag, dust is filtered by the dust box;
2, cloth bag dustproof: cloth bag is tightly pulled with machine, prevent leakage drain. Attention should be paid attention to parking, and the dust should be cleaned in time.
3, woodllar or pool dust removal: mainly using the ventilator to vacuum to the crushing, then vacuum, or vacuum through the pool.
The above three dust removal methods can achieve a good dust removal effect, and can solve the problem of excessive dust, which is generally installed before working to prevent excessive dust.
ALPA Quartz Sand Rod Pin Grinder for NCA Case Sharing: This customer needs to be air flow grading to quartz sand, compared with multiple powder equipment manufacturers, and finally pass the experiment, finally choose Our AlPA classifier equipment. Product particle size: D95: 45μm hour Yield: 8-12T Welcomes major quartz sand manufacturers to visit, incompetent experiments.
1. When the machine starts or starts, the appropriate amount of grease should be applied to ensure its life.
2. Check if the screws and nuts of each component are tightened. Check if the belt is smashed, whether it is tight. 3, regularly check the reliability of the equipment, prevent accidents or accidents.
4, the direction of operation of the spindle should be correct. If it is incorrect, it should be handled in time to avoid damage to the machine.
5, equipment maintenance should be carried out by professional and technical personnel, and others must not be carried out to avoid damage to the equipment.
6, electrical components and lines should be checked regularly, whether it is intact, and the ground is reliable.
7. The equipment should be cleaned in time to prevent the next use to avoid contaminating materials.
The Rod Pin Grinder for NCA produced by our company can not only separate from ordinary powder 20-2 μm is used fine fine powder, and can be used directly with mechanical pulverization equipment, forming a closed circuit, improving pulverity efficiency, and avoiding high temperatures in the cavity to cause adhesion, glue, causing operation, and the grading machine is also obtained.The majority of users have always been praised, and friends who need need are to contact us!
