Rotor Mills for Citrus Fiber is well balanced, only need to be produced in a smooth ground, and low noise, which can avoid dust leakage during the pulverization process, favored by the powder industry.
Rotor Mills for Citrus Fiber Features:
Suitable for other models significantly reduced investment and use cost, suitable for low value-added coarse powder;
2, low energy consumption Small noise; simple structure, less lossless parts, simple and easy maintenance;
3, low speed large diameter single-class wheel, large production capacity; internal wall wear protection;
4, Automated operation, smart instrument monitoring, low labor cost and labor intensity;
5, negative pressure running free dust leaked; achieve environmental protection and labor safety requirements;
6, run stable and reliable, product Uniformity and consistency.
The above is to introduce the working principle and characteristics of Rotor Mills for Citrus Fiber, and the graded granular grade grade grade grading of Rotor Mills for Citrus Fiber has received the favorite of our customers. Welcome to inquire!
AlPa Aluminum Silicate Rotor Mills for Citrus Fiber Experiment: A environmental protection technology company requires grading of aluminum superficition of aluminum silicate due to production demand, because uncertain demand can not be achieved, Therefore, the experiment is experimentally, and the company's aluminum ultrafine powder supplied by the company can be classified by experimenting our ALPA's air grade machine equipment. Finally, the product particle size obtained by the experiment: D90: 18.3 μm, yield: 460kg / h.
Welcomes the major powdery grading needs manufacturers, visit the factory, incoming experiments.
Any mechanical equipment that has certain precautions before use, must check the precautions for operation, which will minimize the damage rate, so Rotor Mills for Citrus Fiber takes what to use Precaution?
1. Check whether the firmware is tight before use, whether the spindle direction is correct, so as not to damage the machine.
2, lubrication should be carried out in accordance with the requirements to make the machine operating properly.
3, the material cannot be mixed before the grinding machine is added to avoid damaging the pulverizer.
4, foreign matter should not be treated in time to avoid damage to the tool.
5. When using the crusher, if there is abnormality, it should be handled immediately to avoid a large loss. 6. If damage should be replaced immediately, certain components should be checked.
