With the continuous advancement of crusher technology, Cell Pulverizer for Fe-Based Amorphous has been familiar with people. The most popular crushing equipment is now the Cell Pulverizer for Fe-based Amorphous. It has a wide variety, available for laboratory, home and factory use. It has a wide range of production, high energy consumption, high automation, and high classification quality.
Cell Pulverizer for Fe-based Amorphous temperature increases, and when the temperature of the working fluid is too high, the flow rate of the gas will increase. Take air as an example, the critical speed at room temperature is 320 m / sec, when the temperature rises to 480 ° C, the critical speed can be increased to 500 m / sec, that is, the kinetic energy increases by 150%. Therefore, increasing the temperature of the working fluid is conducive to improving pulverization. The pressure of the working fluid is the main parameters of the jet speed, but also the main parameters affecting the fineness of the break. Typically, the higher the pressure of the working fluid, the faster the speed, the greater the kinetic energy.
When titanium powder is pulverized by superheated steam, the vapor pressure is usually 0.8 to 1.7 MPa, and generally pulverized calcined material is high, and the material after pulverized surface can be lower.
Technical parameters:
Production capacity: 2T +/- 10%
1. Materials Performance, in general, air pulverization equipment can accommodate all brittle materials, but due to the different material properties, the pulverization performance is also different. Due to the strength, density, hardness, viscosity, shape and electrical performance of different materials, inevitable The difference between the crushing effect is an important factor. The water content of certain materials will change the performance, toughness and viscosity of the crushing material, and the increase in the fineness of the pulverized material will also produce noise.
2. If the processing capacity of the device is the same, if the processing material is different, the grinding fineness will be different. In general, the processing capacity of the airflow grinding machine is proportional to the particle size of the product.
3. The effect of back pressure refers to the average pressure of gas flow grinding equipment, and the increase in back pressure is not conducive to the crushing process.Working efficiency of flow grinding equipment.
Welcome everyone chooses Shan Dong Alpa, the company is committed to the product and service of Cell Pulver For Fe-Based Amorphous, our company provides Cell Pulver for Fe-Based Amorphous for a long time, the price is low, if youInterested in our products, please feel free to contact us.
