Pin Mill Machine of Dried Fruit

Since the 1980s, with the development of the national economy, more and more industries need to dry ultra-fine powder on materials, Pin Mill Machine of Dried Fruit is the most effective powder ultrafine powder mill. One of the equipment. In my country, after 20 years of development, the Pin Mill Machine of Dried Fruit Industries has been widely used in pesticides, food, medicine, fine chemical, electronic battery materials and other fields.

Pin Mill Machine Of Dried Fruit operates in compressed air, gas or high pressure overheating steam. Pin Mill Machine Of Dried Fruit has no movable components, thus eliminating contamination caused by contact with external grinding media. It is also an ideal process for grinding thermal and waxy materials because wear heat is not produced. Pin Mill Machine of Dried Fruit is used for fluid energy. Micronization and grading are carried out in a shallow cylindrical chamber. The high pressure air or steam is injected into the chamber by a specially designed nozzle placed on a peripheral wall.

ALPA Organic Pigment Pin Mill Machine of Dried Fruit Sharing: The company is a Taiwan chemical raw material enterprise, and the company purchased a mechanical grinder for pulverizing organic pigments from our AlPa.

Technical parameters:
Finished granularity: D50 less than 325 mesh
Production capacity: 300kg

Recursively check the temperature rise of the bearing during production, when heaves more than 50 At ° C, the check is stopped, and the reason is to troubleshoot. When the new machine is running, the drive belt is easy to elongate, pay attention to adjust the proper looseness of the belt to ensure the work life of the belt. If the lifting piece should be checked frequently, replace the production quality and production in time. The blade, the bushing should often check the wear situation. If the wear is worn, the productivity decreases, and the particle size is roughly discovered to be replaced. The host and the grading flow bearing are lipomatic lubrication, using special lipids, the replacement period of the bearing is around three months, and the filling of the grease is 1/2 of the interior space in the bearing cavity. Otherwise, It will cause too high of the bearing temperature. The spiral feeder has changed the lipid period of half a year, and Cape Calcium-based grease. In the output shaft E, ie the pulley E, avoiding the weight of the weight, damage the part. It is strictly forbidden to turn the handle on the stop. The lubricating oil used in this regulator is used with N32 alkaline high-zinc high-grade anti-motor oil pressure oil, and the deceleration machine is 401 generally lubricating oil, and it is not necessary to use other machines. After four or five months, new oil should be replaced.

Shan dong alpa is committed to Pin Mill Machine of Dried Fruit, has matureProcess, company technical strength, specializing in Pin Mill Machine of Dried Fruit, survive in quality, welcome everyone to come to consult.