Modern production not only pursues production and finished product quality, but also develops toward environmental protection. Especially in the comminution industry, the overall development trend of my country's Vibration Pulverizer for Styrene technology is stable and developed towards the rate, strong control, high quality.
High-speed jet enters the crushing chamber, collides with particles, multiple times in the friction of high pressure air, shear and pulverized, pulverized materials, and the assembly of rising airflow motion, under the action of the fan, At the power of the Vibration Pulverizer for Styrene, the thickness of the material is separated from the separation, the fine particle size of the pulverization wheel into the cyclone separator and dust removal, continues to be pulverized.
The pulverizer produced by AlPa can perform local internal changes depending on the different characteristics of the material, so that it is more suitable for the pulverization requirements of the material. The crusher has a greater amount of treatment, energy saving, simple operation, and low maintenance costs.
Technical parameters:
finished particle size: D50: 6.78 D90: 12.8μm
Production capacity: 30kg
1. Check whether the firmware is tight before use, whether the spindle direction is correct, so as not to damage the machine.
2, the pulverizer should be lubricated in accordance with the requirements so that the machine is operating normally.
3, the material cannot be mixed before the grinding machine is added to avoid damaging the pulverizer.
4, the pulverizer does not have foreign matter or debris. If it should be handled in time to avoid damage to the tool.
5. When using the crusher, if there is abnormality, it should be handled immediately to avoid a large loss.
6. If damage should be replaced immediately, certain components should be checked regularly.
