Because Impact Pulverizer for Carbon is widely used in all walks of life, research and development of classifying machines at home and abroad attaches great importance to. In the current market, there is a great development space.
Impact Pulverizer for Carbon is a speed, collision with each other, and collide with the target to achieve a pulverization effect.
Generally, the high-speed airflow accelerated pulverized solid particles have the following three ways:
(1) Airflow particles accelerate nozzle: After the airflow and the particles are mixed, the particles can be obtained. Very high speed (almost the same speed of airflow speed), but the material wears in the nozzle in the nozzle, rarely used in practical applications.
(2) Syringe Acceleration Particles: High Speed \u200b\u200b(Ultrasonic Speed) airflow and particles mix accelerate in the mixing tube, the particles obtain a higher speed, but the material is severe to the mixing tube.
(3) Free airflow acceleration particles: particles enter the high-speed airflow in the form of freely drop, only the high-speed air flow is passed through the nozzle and the wear is small.
ALPA Organic Pigment Impact Pulverizer for Carbon Case Sharing: The company is a Taiwan chemical raw material enterprise. In 19 years, the company purchased a mechanical grinding of pulverized organic pigments from our AlPa. grinder.
Technical parameters:
Production capacity: 300kg
High-cost solution
1. Make sure the pulverizer The quality of the grinding dish is not harmful: the real-time monitoring system is carried out on the rolled grinding disc, and the harm of the grinding disc is immediately observed.
3. The refrigeration system does not have a cooling effect: the cooling tower of the intake system is used to use a water cooler to use the continuous liquidity cooling circulating water to grease the heat production. When driving, when driving, touch the cooling tower with hand The oil pipe, the temperature difference is small, almost not, can be seen that the single cooling tower effect is not obvious, the heat exchange time of the cooling circulating water and the grease is too short, and the cooling tower is connected in series, and the cooling tower is refrigerated. Extend heat exchange time.
I want to know more product knowledge and continue to pay attention to our website. If you need to buy Impact Pulverizer for Carbon, please feel free to contact us.
