Environmentally friendly Turbo Mill Machine for Rehmannia has gradually become the market leading to mechanical equipment, and the modern new mechanical equipment in the machinery and manufacturing industries in the stage has gradually replaced traditional rough mechanical processing production. It has also become a new dominant leading to the realization of technological innovation and upgrading at this stage.
The components of Turbo Mill Machine for Rehmannia include drive motors, pulverized wheels, fine powder and coarse powder outlets, raw materials inlets and two air imports. In addition, it is widely used and is a very good machine. Vertical air pulverizer can be used in squares, crystalline stone, quartz, gypsum, silica, corundum, cement, alumina, etc., which plays an important role.
ALPA Activated Carbon Turbo Mill Machine for Rehmannia Case Sharing: This customer is a research institute Dalian, which requires ultrafine pulverizing activated carbon during research. Investigate a number of domestic vendors, and finally choose to work with our AlPa and purchased a Turbo Mill Machine for Rehmannia.
Ultra-mica Turbo Mill Machine for Rehmannia Operation:
1, you need to check whether there is oil in the lubrication before booting.
2, clearing the metal, sand, stone and other debris in the material to prevent damage to the machine.
3, the hand must not reach into the feed port, and the cover must not be opened in the operation.
4, the screen aperture should be appropriately selected, and the damage is required.
5. It is strictly forbidden to start the load, the machine is running a minute and then feeds, and the appropriate amount of water is marked.
6, the air is idling in front of 2 minutes to turn off the machine.
