At present, Hammer Pulverizer for Foaming Agent has gradually entered people's lives, more and more plants, and companies are using the equipment.
Hammer Pulverizer for Foaming Agent as a high-pressure air flow as a pulverized kinetic energy into a crushing cavity, the gas flow, the airflow distribution station, the airflow passes through the Ravar nozzle accelerated supersonic airflow into the crushing room, The material and the venturi nozzle enters the crushing chamber synchronous accelerated grind.
Since the flow cycle of the jet of the crushing chamber and the animal feed, the particles and the particles and the fixed target wall hit, collide, friction, and grind. The fine particles were opened into the center of the pulverizer, and the cyclone separator was entered at the drive of the heart flow, and the coarse powder was thrown into the periphery of the pulverizing chamber, and cycled under the action of centrifugation and continued to be pulverized.
Technical parameters:
finished particle size: 100-325 目
Production capacity: 500kg
1. If a lubricating oil is added to the rotating section, if the bearing and the shaft are relieved, the bearing will be adjusted; if the bearing wear is impeded, the bearing will be replaced.
2. There is also noise during the pulverization. The cooling sleeve can be used to reduce the temperature, which can allocate water in the crushing chamber.
3. Install a muffler on the fireplace of the crushing room.
4. Resistance equipment, such as using damping boards.
Welcome everyone chooses Shan Dong Alpa, the company is committed to the product and service of the airflow pulverizer, our company provides Hammer Pulverizer for Foaming Agent, the price is low if you have our Hammer Pulverizer for Foaming Agent is interested, please feel free to contact us.
