Rotor Mill Machine Of Yttrium Oxide plays a vital role in the current industrial production. In major minerals, chemical industry, pharmaceutical industry, and food manufacturing industries are widely used. With Rotor Mill Machine of Yttrium Oxide's continuous development of major industries, especially medicine, the food industry has put forward the purity of materials during the pulverization process. The new requirement, it is desirable that the powder can be kept clean. In the traditional Rotor Mill Machine of Yttrium Oxide, carbon steel, stainless steel is generally used as a liner material of Rotor Mill Machine of Yttrium Oxide.
Rotor Mill Machine of Yttrium Oxide has several types of type: flat gas flow grinding, fluidized bed flame mill, circulating tube gas flow mill, jet gas flow mill and target gas flow grinding. The main performance characteristics of the pulverizer:
1, the airflow pulverizer includes a vertical pulverizer. The size of the product can be adjusted between D97: 8 and 150 microns, with a good particle shape and a narrow particle size distribution. It can be used in series with a multi-stage crusher and produces a product having multiple particles.
2, the airflow pulverizer is easy to disassemble, the inner wall is smooth, no dead angle. The whole system is closed, the dust is small, low noise, and the production process is clean and environmentally friendly.
3, the airflow pulverizer control system adopts program control, easy to operate.
ALPA Corkson Rotor Mill Machine of Yttrium Oxide Case Sharing: The company is a professional manufacturer of active biological extracts. It is necessary to meet the ultrafine pulverizer to meet the requirements of GMP, and investigate a number of powder equipment manufacturers. The Rotor Mill Machine of Yttrium Oxide purchased our AlPa.
Technical parameters:
Finished particle size: 100 full pass
Rotor Mill Machine of Yttrium Oxide is a crusher, any mechanical equipment, There must be a certain precaution before use, so you must check the precautions to operate, minimize the damage rate, then what is the precaution before using a jet ball mill? Here are some introductions.
1. Check whether the firmware is tight before use, whether the spindle direction is correct, so as not to damage the machine.
2, the pulverizer should be lubricated in accordance with the requirements so that the machine is operating normally.
4, powderThe deviation does not have foreign matter or debris.If it should be handled in time to avoid damage to the tool.
5. When using the crusher, if there is abnormality, it should be handled immediately to avoid a large loss.
6. If damage should be replaced immediately, certain components should be checked regularly.
The company provides free experiments and testing, and provides 24-hour consultation services, welcome to use.
