With the continuous development of pulverizer technology, Cell Mill Machine for Ferrosilicon has gradually penetrated into everyday life.
High-speed jet enters the crushing chamber, collides with particles, multiple times in the friction of high pressure air, shear and pulverized, pulverized materials, and the assembly of rising airflow motion, under the action of the fan, At the powerful centrifugal force of the rotational speed of Cell Mill Machine for Ferrosilicon, the thickness of the material is separated from separation, the fine particle size of the pulverization wheel into the cyclone separator and dust removal, continues to be pulverized.
The pulverizer produced by AlPa can perform local internal changes depending on the different characteristics of the material, so that it is more suitable for the pulverization requirements of the material. The crusher has a greater amount of treatment, energy saving, simple operation, and low maintenance costs.
Alpa CDC Cell Mill Machine for Ferrosilicon case share: This customer is a large-scale comprehensive group company specializing in the mining, powder processing and sales of heavy crystalline mines, which is imported from abroad. Restalline crushing equipment. Later, by understanding, knowing the ultrafine pulverization equipment of our ALPA Co., Ltd., in terms of performance, in terms of foreign devices, far exceeding the same type of equipment, far exceeded the same type of equipment. Finally, after many exam, I purchased Cell Mill Machine for Ferrosilicon from our company.
Technical parameters:
Finished particle size: 1250 mesh
Production capacity: 1.2-1.5T
Temperature rises in the bearing must often be checked during production, when temperature rise exceeds 50 ° C It should be downtime check, and the reason is to troubleshoot. When the new machine is running, the drive belt is easy to elongate, pay attention to adjust the proper looseness of the belt to ensure the work life of the belt. If the lifting piece should be checked frequently, replace the production quality and production in time. The blade, the bushing should often check the wear situation. If the wear is worn, the productivity decreases, and the particle size is roughly discovered to be replaced. The host and the grading flow bearing are lipomatic lubrication, using special lipids, the replacement period of the bearing is around three months, and the filling of the grease is 1/2 of the interior space in the bearing cavity. Otherwise, It will cause too high of the bearing temperature. The spiral feeder has changed the lipid period of half a year, and Cape Calcium-based grease. In the output shaft E, ie the pulley E, avoiding the weight of the weight, damage the part. It is strictly forbidden to turn the handle on the stop. The lubricating oil used in this regulator is used with N32 alkaline high-zinc high-grade anti-motor oil pressure oil, and the deceleration machine is 401 generally lubricating oil, and it is not necessary to use other machines. After four or five months, new oil should be replaced.
Each series of models have different performance characteristics, realizationDifferent, different production efficiency, different production and production environment, the price of processing equipment is also different, customers can consult the ALPA engineers to purchase appropriate models and specifications according to their own situation, welcome to inquire.
