With the continuous increase in social needs, Rod Pin Mill Machine of Granular Silicon continues to improve in the use of performance, finished product quality, service life, and good raw materials into micro-powder, and it has A wide range of applications in many areas such as chemical, food, pesticides, cosmetics, dyes, coatings, and electrons.
Rod Pin Mill Machine of Granular Silicon is to change the linear and surface impact grinding of conventional grinding machines to space 3D impact grinding, and take advantage of high speed generated by jet in the substance flow of the crushing chamber. Airflow, enabling the pulverization zone to produce gas-solid pulverization and grading circulating fluid effects, and improve the efficiency and energy integrated utilization of impact crushing.
The high-speed airflow generated by the jet impact can be fully utilized to the material flow of the pulling chamber than the other conventional methods. The average energy consumption is reduced by 30% to 40%. Since the impact-crushing area and the gas-solid flow zone are placed in the intermediate space of the pulverized chamber, the impact corrosion of high-speed airflow driven materials is improving, and the jet impact grinding process is improved. The most severe wear problem greatly reduces the possibility of material pollution, using high purity nitrogen, argon and other protective gas as a working medium, prevent oxidation, low-loop operating gas consumption, low cost. During the fully closed-loop operation, no dust is flying, and there is no contamination of the environment, and it is unharitten about the human body.
Technical parameters:
finished particle size: 200-300 目
Production capacity: 1.5T
Select ROD PIN MILL MACHINE OF Granular Silicon Lubricant Products to select the type and label of the lubricant according to the instructions on the device manual. General Rod Pin Mill Machine ofThe Granular Silicon equipment manufacturer's production and use of lubricants is very clear. This requires we choose in actual work. According to the work conditions of the equipment. For machines with higher temperatures, high viscosity oils are used, ensuring the thickness of grease under normal operating conditions, ensuring smooth flow of lubricants in low temperature environments; when the mechanical working speed is high, the viscosity is selected. Smaller oil ensures good permeability and fluidity. If the grease is too thick at this time, it will increase the operational resistance. When the load is relatively large, the oil having a slightly high viscosity should be used to ensure the thickness of the grease.
When purchasing Rod Pin Mill Machine of Granular Silicon Lubricants, they should help their physical properties and chemical properties such as viscosity, flash point, corrosion resistance, etc., but also combined with manufacturers, considering comprehensive benefits Under the premise of management benefits, minimize the type and quantity of oil to reduce financial costs. The storage of lubricants and storage of oil plays an important role in the performance of the oil. When the lubricating oil is in contact with the non-ferrous metal, it will oxidize, which affects its performance, and corrosion during use, causing damage to the machine. Therefore, in the storage process, it should be avoided in contact with copper. The barrel oil should be kept cleaned and ventilated, protected from light. The storage time of lubricating oil should not be too long to avoid deterioration.
The above is the knowledge of the crusher lubricant brought by Rod Pin Mill Machine Of Granular Silicon
