Impact Pulverizer for Copper Powder

Impact Pulverizer for Copper Powder can be used for important or need to be grounded to granular product processing, AlPA ultra-fine pulverizer product is good, affordable, factory direct sales, also to promote after-sales maintenance services for customers, good service attitude

1, the contents of the formulation, the product particle size D97: 8-150 microns are adjustable, the particle shape is good, the particle size distribution is narrow.
2, can be used in series with the classification machine, and produce a plurality of particle size sections 1 time.
3, equipment disassembly and packing is convenient, and the inner wall is smooth and no dead angle.
4, the whole system is closed, the dust is small, the noise is low, and the production process is clean and environmentally friendly.
5, the control system uses program control and easy to operate.

Alpa Aluminate Impact Pulverizer for Copper Powder case share: The company discovered that domestic ultrafine pulverized equipment, which has been flattened with similar companies in foreign countries. And the price is more advantageous than foreign similar import companies. Finally, our Impact Pulverizer for Copper Powder is purchased as a production equipment.

Finished granularity: D97: 20μm
Production capacity: 100kg


Let's talk about the common fault of Impact Pulverizer for Copper Powder.

Impact Pulverizer for Copper Powder Troubleshooting:
1 It will cause feedback. When this happens, you should find out the cause, then take elimination measures, or remove the valve, replace the powder bag, improve the breathability, or replace the hammer head.
2, bearing overheating: When the bearing lubrication is poor, the damage or the spindle bend, the rotor is severely imbalance, and the belt is too tight and the bearing is overheating. By replacing the lubricant, replace the bearing and spindle, balance the rotor and adjust the belt, the bearing can return to normal state.
3, the strong vibration of the airflow pulverizer: The mounting hammer is wrong. The corresponding weight deviation of the two groups of heavy hammers is too large, the bearing is damaged or the spindle is bent, and the foot is connected to the screw. According to the specific reason, step by step.
4, there is a sound inside the crusher: the part of the crusher is damaged, fall off or hard, such as stone and iron into the machine, that is, the external sound will be generated, and the machine should stop replacing damaged components or remove hard objects.
5, low production efficiency: insufficient electric power power, misconduct, belt slip, severe hammer wear, raw material unevenness or high raw material moisture content is the main reason for the low production efficiency.
We need to regularly check the machines and equipment to ensure proper work, which not only guarantees the safety of people, but also improves equipment efficiency.
The equipment market is a rapidly changing. At present, Impact Pulverizer for Copper Powder has certain needs, but the society is constantly evolving, whether it is necessary to keep pace with the times, in order to lead the industry.