With the continuous development of pulverizer technology, Vibration Mill Machine for Fused Silica Powder has gradually penetrated into people's daily lives.
A Vibration Mill Machine for Fused Silica Powder costs, if you want to use Vibration Mill Machine for Fused Silica Powder for a long time, please pay attention to the following:
1. Production In the process, the temperature rise of the bearing should be checked frequently. When the temperature rise exceeds 50 ° C, the examination should be stopped, find out the cause, and troubleshoot.
2. When the new machine is running, the transmission belt is easy to eliminate, so it should be noted to adjust the appropriate tightness of the belt to ensure the life of the belt.
3. Test and timely replacement of vulnerable parts should be performed in time to ensure quality and production.
4. The wear of the blade and bushing should be continuously checked. If the productivity is lowered, the particle size is thick after wear, and the wear is immediately replaced.
5. Vibration Mill Machine for Fused Silica Powder host and level score bearing use 2 special grease (265-295 degrees) lubrication.
6. The replacement period of the bearing is 2000 hours, and the amount of oil filling of the bearing chamber gap is 1 ≤ 2 (try) or 3 ≤ 4 (try), if it is not too much, the bearing temperature Will be too high.
7. The replacement period of the spiral feeder is 4,000 hours, and ordinary calcium based grease is added. Standard operation to exchange for longer use of airflow crushers.
The above is a 7 point of introduction to the daily maintenance of Vibration Mill Machine for Fused Silica Powder.
ALPA Desulfurizer Vibration Mill Machine for Fused Silica Powder case Share: The company is a high-tech company that requires a desulfurizer crusher, investigating a number of different powder equipment at home and abroad. Factory, finally chose our Alpa's Vibration Mill Machine for Fused Silica Powder.
Technical parameters:
Finished particle size: 200 mesh 90% By
Production capacity: 4-5T
During the production process, it mustFrequently check the temperature rise of the bearing, when the temperature rise exceeds 50 ° C, should be stopped, and the reason is to rule out the fault. When the new machine is running, the drive belt is easy to elongate, pay attention to adjust the proper looseness of the belt to ensure the work life of the belt. If the lifting piece should be checked frequently, replace the production quality and production in time. The blade, the bushing should often check the wear situation. If the wear is worn, the productivity decreases, and the particle size is roughly discovered to be replaced. The host and the grading flow bearing are lipomatic lubrication, using special lipids, the replacement period of the bearing is around three months, and the filling of the grease is 1/2 of the interior space in the bearing cavity. Otherwise, It will cause too high of the bearing temperature. The spiral feeder has changed the lipid period of half a year, and Cape Calcium-based grease. In the output shaft E, ie the pulley E, avoiding the weight of the weight, damage the part. It is strictly forbidden to turn the handle on the stop. The lubricating oil used in this regulator is used with N32 alkaline high-zinc high-grade anti-motor oil pressure oil, and the deceleration machine is 401 generally lubricating oil, and it is not necessary to use other machines. After four or five months, new oil should be replaced.
ALPA Design Vibration Mill Machine for Fused Silica Powder equipment has gained a very good reputation in actual production applications, and it also won the praise of users and friends. If you need to purchase the Vibration Mill Machine for Fused Silica Powder, please feel free to contact us.
