In the rapid development of rapid, there are many people have a certain understanding of Rotor Grinder With Coffee Beans, and crusher technology is in an absolute leader in the industry.
Crushing product except for particle size, there is also a narrow particle size distribution, smooth particle surface, particle shape regular, high purity, high activity, good dispersibility. Since Rotor Grinder with coffee beans generates a Juromon cooling effect during the pulverization process, it is also suitable for ultrafine pulverization of low melting points and thermal materials. The RTOR GRINDER WITH COFFEE Beans The gas ratio during the pulverization process is an important technical parameter and important indicator.
If the gas is too small, the kinetic energy of the airflow will be insufficient, which will affect the fineness of the product. However, if the gas ratio is too high, not only waste energy, but even the dispersion performance of certain particulate materials will also be deteriorated.
When the particle size of the feed is smashed, the particle size of the feed is more stringent. In the case of titanium powder, when pulverizing the calcined material, it is necessary to control 100-200 mesh; the material after the pulverization surface is generally 40-70 mesh, and cannot exceed 2-5 mesh.
AlPa Steel slag Rotor Grinder with coffee beans case share: This customer is Xi'an Steel Residue Application Technology Co., Ltd., mainly engaged in the reuse of steel slag. During the production process, steel slag ultrafine powder is required, screening the required steel slag micropowder, the customer investigates many domestic powder equipment manufacturers, and finally chose our ALPA Vertical Air Classifier.
Product particle size: D97: 5-75μm
Hour Yield: 200-500kg
To achieve better use, pay attention to Rotor Grinder with coffee beans cut Daily maintenance, pay attention to the following:
2. When using the pulverizer, the drive belt is easily stretched, and should pay attention to adjust the appropriate tightness of the belt to ensure the life of the belt.
3. Test and timely replacement of vulnerable parts should often be performed to ensure quality and production.
4. Continuously check the wear of blade and bushing, if the productivity is lowered, the particles are thicker, and will be replaced after wear.
5. The change period of the pulverizer bearing is 2000 hours, and the amount of the bearing cavity is 1 ≤ 2 (try) or 3 ≤ 4 (try), otherwise the axisThe temperature is too high.
I want to know more product knowledge and continue to pay attention to our website.If you need to buy Rotor Grinder with coffee beans, please feel free to contact us.
