We all know that Rod Pin Crusher With Iron Oxide is a very strong airflow crushing equipment, many stubborn hard materials come into a shredder to be cut into a uniform block,
in order to Rod Pin Crusher With Iron Oxide has a longer service life, making good performance, need to keep in mind using common sense.
1, for the newly purchased equipment requires novice necessary to understand its operating specifications. If it is a novice operation, it is necessary to prevent unnecessary losses during the operation.
2, if the machine is abnormal, if the machine is abnormal, it is necessary to keep the mechanical personnel to repair debugging and turn off the power. Non-designated personnel prohibit private commissioning or disassembly machine components during the maintenance process. When repairing commissioning, you must turn off the machine power.
3, the Rod Pin Crusher With Iron Oxide is cleaned in time after use. Keep ROD PIN CRUSHER WITH IRON OXIDE internal cleaning, avoiding oxidation of the material and the inner contact.
AlPA Cobalt Solitrate Rod Pin Crusher With Iron Oxide Case Sharing:
A energy company is a professional lithium-ion powertrain for new energy vehicles, lithium ions with energy storage High-tech enterprises in battery development and industrialization, the company actively responded to national policy calls, in order to promote new energy vehicles, the new energy vehicle, fast, sustainable development, insist on walking independent research and development, with core technology of complete independent intellectual property The system has successfully developed a number of series of lithium-ion power battery batteries, and has been widely used in my country's electric new energy vehicle, market distribution has spread all over the country.
Product particle size: D50: 15μm
Hour Yield: 600kg
Rod Pin Crusher with Iron Oxide should maintain and maintain
1. Before using it, check all the equipment The standard parts are not tightened, and the belt is tight.
3, check the electrical appliance is not intact.
4. Check the hardware such as metal-free materials in the equipment crushing room, otherwise it will damage the tool, affect the equipment operation.
5, the material must be checked before crushing, and there is no metal material hard article to be mixed to prevent crash or cause combustion.
6, the oil cup on the device should often inject the lubricant,Make sure the equipment runs normally.
7. Stopping the feeding before the shutdown, if it does not continue to be used, clear the in the machine.
8. Check the tool with the screen on time is damaged. If it is damaged, it should be replaced first.
9. When using the timing, there is a small oscillation, so it is necessary to connect the handle to the handle to avoid accidents.
