Hammer Mill for Chemical pigment

With the development of society, the application of Hammer Mill for Chemical Pigment has become more large.

Hammer Mill for Chemical Pigment works in work, and when the temperature of the working fluid is too high, the flow rate of the gas will increase. Taking air as an example, the critical speed at room temperature is 320 m / sec, and when the temperature rises to 480 ° C, the critical speed can be increased to 500 m / sec, that is, the kinetic energy increases by 150%. Therefore, increasing the temperature of the working fluid is conducive to improving pulverization. The pressure of the working fluid is the main parameters of the jet speed, but also the main parameters affecting the fineness of the break. Typically, the higher the pressure of the working fluid, the faster the speed, the greater the kinetic energy.
When titanium powder is pulverized by superheated steam, the vapor pressure is usually from 0.8 to 1.7 MPa, and generally pulverized calcined material is high, and the material after the pulverized surface is low.

AlPa Composite Powder Hammer Mill for Chemical Pigment Case Sharing: This customer is a renewable resource company that requires a different particle size selection of composite powder, which requires ultrafine powder less than 30 μm. Investigate a number of domestic grading equipment manufacturers, did not find the right equipment, and finally found the right equipment in our AlPa, and selected our vertical grade machine equipment. Product particle size: D97 ≤ 30μm hour yield: 80T

Welcome major composite powder manufacturers to visit, incompetent experiments.

Shandong AlPa Powder Technology Co., Ltd. specializes in the production and development and service of Hammer Mill for chemical Pigment product technology, welcome to consult. With perfect quality, excellent service, the most affordable price, customers provide the best products and services for customers.