Pin Mill of EPOXY RESIN is a very convenient device that can be used to crush all kinds of products, especially some fine particle products need to be used.
Pin Mill of EPOXY RESIN is different from Other crushers, which are pulverized by the impact of the particles, the impact of the material on the impact of the material, the impact of the shear, the high-speed airflow, the material of the material, friction and shear and other components. It has the following main features:
1. The grinding temperature is low, which can be pulverized, low melting material. According to the high-speed jet Joule effect, when the gas is thermally expanded, the gas will cool itself, thus canceling the heat generated by collision and friction.
2, short production cycle, high release rate. Due to high-speed collisions and closed crushing, the probability of collision between materials is very large, and dust does not leak.
3, a product having high purity (less pollution), uniform particle size distribution (D95 cumulative frequency) can be obtained.
4. Some materials that require wet pulverization can also be pulverized by airflow pulverization to achieve uniform and small powder.
5, a variety of joint operations can be implemented, and drying operations can be achieved. It can be seen that the research hotspot of the air pulverizer is very highlighted, and it plays a raised role in the pharmaceutical industry.
ALPA precipitation method White Carbon Black PIN MILL OF EPOXY RESIN Case Sharing: The customer is an Egyptian company, learned from our English official website to the ultra-fine pulverization experience of our precipitation method. There are a number of cooperative customers. Through the incoming experiment and on-site visit. Determined our AlPA strength, and finally purchased Pin Mill of EPOXY RESIN from our company.
Today, Pin Mill of EPOXY RESIN is introduced to you, please find more information, please continue to pay attention to our website.
