In this economically flourished area, many people know that Turbo Mill of Inorganic Salts, crusher technology is in a leading position in the same industry.
Many manufacturers who want to make a crushing process will choose to buy a Turbo Mill of Inorganic Salts, but not all crushers can apply production and processing, and the wrong processing method will make the crusher wear speed becomes fast. . The wear of the pulverizer is too fast, and the inner cavity of the pulverizer of the comparison should be used when the material hardness is too large.
The device operates for a long time in a higher pulverized pressure, which requires uniformity of cyclical replacement loss.
The products after the crushing are generally single peaks. If there is a double-peak or peak main reason, the pulverization pressure is unstable. The solution is based on the gas supply of gas source equipment to meet the amount of gas required for work, ensuring that the lowest air supply pressure of the gas is high than the working pressure.
The feed speed is unstable. Solution to check if there is a blockage at the feed valve; the material is not very viscous, uniform in liquidity, and the stable control feed speed. The filter cake is formed in the pulverizer chamber. The solution is suspended, and the filter cake in the pulverizer chamber will then restore production.
ALPA Seaweed Feed Turbo Mill of Inorganic Salts Case Sharing: The company is a seafarer enterprise in Yantai. It can be used to smash the seaweed during breeding. After smashing, it can be used as sea cucumber feed, saving feed purchases. cost. By comparing the long-term use of Turbo Mill of Inorganic Salts, it is possible to save the cost of the production line for several years. The company purchased our ALPA Turbo Mill of Inorganic Salts.
Technical parameters:
Finished granularity: D90: 400 mesh
Production capacity: 400kg / h
The above is the use of Turbo Mill of Inorganic Salts for everyone. , Want to know friends who know other crushersYou can pay more attention to us!
