Pin Mill equipment is one of the modern industry important basic technology, in modern industry, the required starting material as a powder state having a small and uniform particle size and high purity, ultra-fine through which feedstock properties changes, so that conventional materials having a broader application range,
Pin Mill equipment working temperature rises, when the temperature of the working fluid is high, the flow rate of the gas increases. Taking air as an example, the critical speed at room temperature is 320 m / sec, and when the temperature rises to 480 ° C, the critical speed can be increased to 500 m / sec, that is, the kinetic energy increases by 150%. Therefore, increasing the temperature of the working fluid is conducive to improving pulverization. The pressure of the working fluid is the main parameters of the jet speed, but also the main parameters affecting the fineness of the break. Typically, the higher the pressure of the working fluid, the faster the speed, the greater the kinetic energy.
When titanium powder is pulverized by superheated steam, the vapor pressure is usually from 0.8 to 1.7 MPa, and generally pulverized calcined material is high, and the material after the pulverized surface is low.
The main products are a microsilica fused silica sand, fused silica powder, microsilica composite soft, high purity and ultrafine silica powder, active silica, crystalline silicon complete powder, spherical silica powder and other specifications.
Main uses: photovoltaic solar industry and electronic packaging materials, high temperature refractory materials, aerospace materials, quartz glass tubes, quartz ceramic rolls, and coated copper industries.
parameters of the case:
Product size: 20um to remove fines
hourly output: The separation efficiency of 60-90%
