Cell Mill for phosphate is a very convenient device that can be used to crush all kinds of products, especially some fine particle products need to be used.
Cell Mill for phosphate is using multiple The relative-arranged nozzle forms a high speed airflow to achieve ultrafine pulverization. The crushed material enters the pulverizer with the rising airflow. Since the pulverized rotor is high-speed rotation, the particles are subjected to the centrifugal force generated by the pulverized rotor, and the center of heart is generated by the viscous action of the air flow. When the centrifugal force of the particles is greater than the heart force, that is, the pulverized particle size The coarse particles return to the pulverizing chamber to continue the impact, fine particles flow into the cyclone separator, collectors, and the gas is discharged from the air.
Low temperature without mediμm smashing, ensuring high purity and physical characteristics of the product. The equipment runs no dust pollution in a negative pressure state. The full use of jet is more than 30% of the pulverization efficiency than the conventional gas flow mill, and the pulverization accuracy is higher.
ALPA equipment is small, the structure of the pulverizer can be highly machined ultrafine powder, avoiding the wear of the horizontal pulverizer pulverized part, and the service life of the equipment under the same material is the international similar product. Multiplier. Small granularity is wide, and the product particle size can be arbitrarily adjusted within 1-74μm.
The Cell Mill for Phosphate produced by our company can not only distribute 20-2μm from the ordinary powder, but also directly with mechanical pulverization equipment, forming a closed circuit, improving the pulverization efficiency, and It can avoid high temperature in the cavity to cause adhesion, glue, glue, causing operations, and at the same time, the classifier has also received a well-praised, and the friends needed to contact us!
