SINGLE CLASSIFY WHEEL CLASSIFIER for Metallic Silicon increases, when the temperature of the working fluid is too high, the flow rate of the gas will increase. Taking air as an example, the critical speed at room temperature is 320 m / sec, and when the temperature rises to 480 ° C, the critical speed can be increased to 500 m / sec, that is, the kinetic energy increases by 150%. Therefore, increasing the temperature of the working fluid is conducive to improving pulverization. The pressure of the working fluid is the main parameters of the jet speed, but also the main parameters affecting the fineness of the break. Typically, the higher the pressure of the working fluid, the faster the speed, the greater the kinetic energy. When the titanium powder is pulverized by overheating steam, the vapor pressure is typically from 0.8 to 1.7 MPa, and generally the pulverized calcined material is high, and the material after the pulverized surface is low.
In the production process, SINGLE CLASSIFY WHEEL CLASSIFIER for Metallic Silicon is wide, how do you operate more secure? 1 Use range because it will be very damaged. 2. If the super-fine classifier is running, the operator does not stand in the range of rotation to avoid accidents. 3. Before working, the staff is in order to ensure its own safety, wear a predetermined work costume. 4, when the grading machine is added, do not hard to add the machine. 5. If the classifier begins, the staff should not leave and prevent problems. 6. If the ultrafine classifier is discovered, stop checking. 7. Do not open the cover or other actions before the classifier is not completely stopped, if you want to operate, you need to completely stop it.
Shandong ALPA Powder Technology Co., Ltd. specializes in the production and development and service of Single Classify Wheel Classifier for Metallic Silicon product technology, welcome to consult. With a perfect quality, excellent service, the most affordable price, the company provides the best crusher products and services for customers.
