As is well known, Single Classify Wheel Classifier With Fishbone This product technology has been widely valued by the industry.
Single Classify Wheel Classifier with FishBone features ultrafine pulverized in dry powder materials. The impact is large, up to 2.5 Mach. General materials are easily crushed to 1-10 microns. 2. Relative fluidized bed gas flow pulverizer has a good crushing effect on viscous materials, and the crushing process does not generate clogging materials that cannot be pulverized. 3, heating, grinding process due to compressed gas nozzles, temperature drop, no mechanical friction, the grinding process does not warm, break, suitable for low-melting thermal sensitive materials. 4, easy equipment, convenient cleaning, convenient operation and maintenance, small area, low noise, no vibration, and so on.
How to correctly operate Single Classify Wheel Classifier With FishBone? Before the device is powered on, the connection site, seal and lines are detailed, and all the test can be operated after the problem can run the powder classifier. The boot should be operated in the boot order. 3 minutes before the shutdown should be stopped, then shut down, and the order is opposite to the boot order. The amount of feed should be determined according to the size of the powder grading machine load, ensuring that the host is in the state of rated load. The fineness of the particles can be adjusted to adapt to the grading requirements. Depending on the heat-sensitive material, the device is separated, then the power of the main motor is slightly lower than the rated power. The size of the air volume in the delivery line can be achieved by adjusting the damper of the fan.
Today, I will introduce you to here, I want to know more information, please continue to pay attention to our website.
