Single Classify Wheel Classifier with fly ASH technology is one of the important basic technologies in the modern industry. In modern industries, it is required to have a small and uniform particle size and higher purity in a powder state. The properties of raw materials have changed, making ordinary materials have a broader application range,
Single Classify Wheel Classifier with fly ASH works by crusher and cyclone separator, A complete crushing system composed of dust collectors and airplanes. After the compressed air is filtered, the high-speed nozzle is sprayed into the crushing chamber, and the material is pulverized by repeated collision, friction and shearing at the intersection of the multi-high pressure airflow. The crushing material moves together with the rising airflow to the grading area with the suction of the fan. Under the action of centrifugation, the thickness of the material is separated, and the grading cyclone is required to grade the cyclone to enter the cyclone dust collector, and the coarse comminution continues to be pulverized down. Suitable for dry crushing of various materials that are less than 9 in the Moh-hardness, especially for high hardness, high purity, high value-added crushing materials. It includes a vertical classification device. The size of the product can be adjusted between D97: 8 and 150 microns, with a good particle shape and a narrow particle size distribution. Low temperature without media crushing. It is especially suitable for thermal sensitivity, low melting point, sugar-containing and volatile substances. The grinding process mainly depends on the collision of the material itself, which is different from the impact of the mechanical crushing blade or the hammer on the ground on the ground, so the equipment has high wear resistance and high product purity.
Operation SINGLE CLASSIFY WHEEL CLASSIFIER WITH FLY ASH What should be paid attention to? Before running, the operator needs to confirm whether the feed tube inlet and exit of the raw material feed tube are foreign matter. Whether there is any raw material at the exit. If the foreign matter is found to handle a clean and then boot. When the grading machine is operating normally, in order to maintain the stability of the graded, the pressure of the feed tube compressed gas is required to be monitored. Check if the dust collector pressure loss of the laboratory classifier is stable. Decompose, clean, check, and maintain the main power supply when maintaining the laboratory grade machine to avoid danger.If the late classifier, precision classifier,The equipment such as jet grading machine is intention, you can directly contact us, product quality is guaranteed, fair price, perfect service, welcome everyone to buy!
