Many manufacturers who want to make a crushing process will choose to purchase a FL / ITC Multiple Classify Wheel Classifier With Soybean Meal, but not all crushers can apply to production and processing, erroneous processing methods. The wear speed of the pulverizer will become fast. The wear of the pulverizer is too fast, and the inner cavity of the pulverizer of the comparison should be used when the material hardness is too large. The equipment operates for a long time in a higher crushing pressure, which requires uniformity of cyclical replacement loss. The products after the crushing products are generally single peaks. If there is a double-peak or peak main reason, the pulverization pressure is unstable. The solution is based on the gas supply of gas source equipment to meet the amount of gas required for work, ensuring that the lowest air supply pressure of the gas is high than the working pressure. The feed speed is unstable. Solution to check if there is a blockage at the feed valve; the material is not very viscous, uniform in liquidity, and the stable control feed speed. The filter cake is formed in the pulverizer chamber. The solution is suspended, and the filter cake in the pulverizer chamber will then restore production.
FL / ITC Multiple Classify Wheel Classifier with Soybean Meal Features: 1. The structure is reasonable, stable, small energy consumption, large crushing capacity, small size, no malfunction, and convenient cleaning and maintenance. 2, the outer casing uses water cooling and the air volume generated by the air to transport the crushing material, and the temperature is increased, and the thermal material is pulverized. 3, the wear of the blade is generated by a large number of ultrasonic eddy currents produced on the back of the blade and the vibration of the high frequency pressure. 4, the structure is compact, there is no dust overflow problem.
How to install FL / ITC Multiple Classify Wheel Classifier with Soybean Meal, the following content hopes to help you. 1. Chinese medicine shredder should be more smooth and easier to use. 2. Before working in traditional Chinese grinding machines, a clean processing material must be selected. Hard metal, such as metal or stones, can not be mixed into the machine, so as not to damage parts or faults. 3. Before the machine is opened, check whether the components of the machine are firm and reliable. Everything is normal, so you can work. 4, turn on the power, turn for 1-2 minutes, check whether the operation is normal, normalNext, the material can be placed. When the crusher is working, the operator cannot leave. Once the sound is abnormal, the power supply should be disconnected immediately. In the new pulverizer raw material, the exit is fixed with a long bag. 5. When using the pulverizer, if the power supply voltage is too low, do not use it to avoid damage to the motor. The power supply is used normally, it is not easy to damage, and the production efficiency is high.
