FL / ITC MULTIPLE CLASSIFY WHEEL CLASSIFIER WITH NATURAL FLAKE GRAPHITE has several types: air flow grinding, fluidized bed flame mill, circulating tube gas flow grinding, jet gas flow mill and target gas flow grinding. The main performance characteristics of the pulverizer: 1, the airflow pulverizer includes a vertical classification device. The size of the product can be adjusted between D97: 8 and 150 microns, with a good particle shape and a narrow particle size distribution. It can be used in series with multi-stage classifiers and produces a product having multiple particle sizes. 2, the airflow pulverizer is easy to disassemble, the inner wall is smooth, no dead angle. The whole system is sealed, less dust, low noise, and production process clean and environmentally friendly. 3. The airflow pulverizer control system uses program control and easy to operate.
FL / ITC MULTIPLE CLASSIFY WHEEL CLASSIFIER WITH NATURAL FLAKE Graphite Principle: When the compressed gas passes through the feed injector, the pulverized raw material enters the pulverization room, there are multiple pulverized nozzles per circumscribed, and the supersonic air flow is injected. The material is subjected to a high speed impact of the airflow and the material collide with each other, and the grading tube is separated. The coarse particles are separated, and the coarse particle cycle returns to the pulverized chamber to continue pulverization, after the internal closed circuit circulation is pulverized, and finally the distribution is uniform. Ultrafine powder. 1. Suitable for dry ultra-micro processes. Due to the large impact speed, it can be more than 2.5 mep, in general, it is easy to obtain 1-10 micron particles, depending on the properties of the material, it is possible to obtain less than 1 micron particles. 2. Because there is a closed circuit classification mechanism inside the pulverizer, the product is thick The particles constantly circulate, and thus the particles are uniform and the particle size distribution range is obtained. 3, the equipment has the advantages of short smashing time, simple structure, convenient operation, small area, low noise (72 decibel) and no vibration. 4, the efficiency is high when pulverization, can be pulverized, and the purity of the pulverized product can be maintained.
The crushing equipment developed by ALPA Technology has been applied in many actual engineering cases, providing basic information for objective understanding of jet grading technology.
