FL / ITC MULTIPLE CLASSIFY WHEEL CLASSIFIER OF SLAG In the current stage, the use of industrial production process is of great significance, and AlPA has been committed to the development and application of equipment such as grading machines for many years, during many years of development The classification machine we have gradually begins to develop in the direction of modernization, and we believe that we can provide a complete set of production planning programs in a large range.
FL / ITC Multiple Classify Wheel Classifier of SLAG is easy to operate, easy to maintain, with high grinding speed in the same product. At the same time, low energy consumption is the lowest in similar products. Products having the same particle size do not have functional, flammability, explosive, and oxidative materials that have particulate formation and particle dispersion, and oxidative materials can be used as a medium to achieve a closed pulverization and inertia. Loss of use of sex gas circulation is very low. Negative pressure production can effectively reduce dust pollution, improve working environment, compact structure, seamless welding technology internally, easy to maintain mechanical maintenance and mechanical cleaning. Since the high pressure gas is ejected from the nozzle, the gas stream causes the animal material to collide, shear and rub, thereby achieving the crushing effect. Since the gas and the high speed of the animal material have a large centrifugal force. Under the effort of the heart, the crude particles were sent to the crushing room for multiple comminution, and the fine powder was discharged from the center exit.The working principle of FL / ITC Multiple Classify Wheel Classifier Of Slag is to use high-speed rotating hammers to hit materials, crush the decision surface, the obedient surface, and the fragile portion such as the natural gap. The material sent to the crusher is affected by the rotor, and the rotor rotates around the central axis at a speed of 25 to 40 m / s, and breaks the first time. The material then obtains the energy disc from the rotor, flying on the hard wall at high speed, and performs secondary comminution.
Let me introduce the operation method of the FL / ITC Multiple Classify Wheel Classifier of Slag. 1. Before using a pulverizer, first check whether all fasteners of the machine are tightened and the belt is fastened. 2. The main axis direction must be consistent with the direction of the arrow on the shroud, otherwise it may damage the machine andPersonal injury. 3. Check if the crusher is complete. 4. Check if the airflow pulverizer has a hard object such as a metal in a crushing room, otherwise it will damage the tool and affect the machine. 5. You must check the purity of the material before crushing. Metal hard materials are not allowed to avoid damage to the tool or cause combustion. 6. The oil cup on the machine should always note full lubricant to ensure that the machine is operating normally. 7. The feeding should be stopped before stopping. If you do not continue to use, remove the residers from the machine. 8. Regular inspection tools and screens are damaged. If damage is damaged, it should be replaced immediately. 9. There is a slight vibration when using the fuselage. Be sure to tighten the cover to connect the handle to avoid accidents.
Shandong Alpa Powder Technology Co., Ltd. is a scientific and technological private enterprise producing various airflow pulverations, airflow mill, medical and air flow crushers, disc air crushers, need to purchase this type. Product users can contact us.
