With the development of society and life, the industry's demand for Fl Multiple-Stage Classifier in Series with Calcite is getting bigger and higher, and the requirements for fineness, purity, and pass rate are increasing. In the current market, there is a great development space.
What kind of performance characteristics do you have in Series with Calcite? This classification device adds vertical grading equipment, product production in design and research and development. The particle size can achieve fine-tuning between 97-150 mm, and can produce a good granular shape, a narrow distribution, and a plurality of particle segments. There is also a classifying machine that will be more rapidly and more rapidly than previous products, and there is no dead angle. The entire system is closed, the dust is less, the noise is low, and the production process is clean and environmentally friendly.
In the production process, we should pay attention to maintenance and maintenance of FL Multiple-Stage Classifier In Series with Calcite. 1. In the production process, the bearing temperature should be checked regularly. When the temperature rises above 50 degrees Celsius, the machine should be stopped to find out the cause and troubleshoot. 2, when the new machine is running, the transmission belt is easily elongated. Pay attention to adjust the appropriate tightness of the belt to ensure the life of the belt. 3, should be checked regularly, replace it in time, and ensure quality and production. 4, should check the wear of the blade and lining periodically. If the productivity is lowered after the wear, the grain size is thicker and the wear is immediately replaced. 5, the host and the hierarchical flow bearing use grease lubrication. 6, the replacement period of the bearing is 2000 hours, the amount of grease is 1/2 or 3/4 (lower test) of the bearing cavity space cannot be filled with too much fat. Otherwise, the temperature of the bearing will be too high. 7, the spiral feeder changes the fat period of 4,000 hours, plus ordinary calcium based grease. 8, in the output shaft E, i.e., pulley E, avoid heavy hush, damage to the part. 9. It is strictly forbidden to turn the handle of the handwheel in the stop. 10. The lubricant used by the governor adopts N32 alkaline high-zinc high anti-wear hydraulic oil, and the reducer uses 401 universal lubricants, and cannot be used by other machines.replace. 11. After 3000 hours, the new oil should be replaced, and then used after 500 hours of the second oil, then use it after 1000 hours.
Shandong AlPa airflow crusher price, quality is more than German brand, environmental protection, granularity concentrated, explosion-proof dustproof. Welcome to inquire.
