In the production process, it should be paid to the maintenance and maintenance of Vertical Air Classifier for Xanthan Gum.
1. In the production process, the bearing temperature should be checked regularly. When the temperature rises above 50 degrees Celsius, the machine should be stopped to find out the cause and troubleshoot.
2, when the new machine is running, the transmission belt is easily elongated. Pay attention to adjust the appropriate tightness of the belt to ensure the life of the belt.
3, should be checked regularly, replace it in time, and ensure quality and production.
4, should check the wear of the blade and lining periodically. If the productivity is lowered after the wear, the grain size is thicker and the wear is immediately replaced.
5, the host and the hierarchical flow bearing use grease lubrication.
6, the replacement period of the bearing is 2000 hours, the amount of grease is 1/2 or 3/4 (lower test) of the bearing cavity space cannot be filled with too much fat. Otherwise, the temperature of the bearing will be too high.
7, the spiral feeder changes the fat period of 4,000 hours, plus ordinary calcium based grease.
8, in the output shaft E, i.e., pulley E, avoid heavy hush, damage to the part.
9. It is strictly forbidden to turn the handle of the handwheel in the stop.
10. The lubricating oil used by the governor adopts N32 alkaline high-zinc high anti-milling oil, and the reducer uses 401 universal lubricants and cannot be replaced by other machines.
11. After 3000 hours, the new oil should be replaced, and then used after 500 hours of the second oil, then use it after 1000 hours.
The above is the relevant content of Vertical Air Classifier for Xanthan GUM, which is provided by Shandong ALPA Powder Technology Co., Ltd. The company has consistently follows the management of the standard, puts the quality in the first production and service policy, and provides the products and services of our customers with confidence.
