With the continuous development of pulverizer technology, Vertical Air Classifier for Fishbone has gradually penetrated into people's daily lives.
Vertical Air Classifier for FishBone is applied to the ultrafine pulverization of the material. After the material is extracted, the powder properties will have a large change, and it is manifested as high viscosity after being affected. Powder is extremely prone to aggregation in the feed opening, pulverizing cavity and exhaust pipe, requires special treatment processes and specific design. Shandong ALPA Powder Technology Co., Ltd. Designed and developed material smashed hit on the crushing of materials. Vertical Air Classifier for Fishbone Compressed Gas Plug the material particles in the bucket into the disc pulverizing chamber 3 by the high-speed jet produced by the feed nozzle, and there are several jet nozzles around the pulverizing chamber, and the high-speed fluid is injected in a direction. The ultra-high speed swirl rotation is generated in the pulverized chamber. The coarse particles in the opposite ultra-high-speed swirls in the ultra-high-speed swirls produced impact and friction in the intersection, and the particles were quickly pulverized. When the particles are pulverized below the fractional particle size below the fractional particle size, the centrifugal force of the particle movement is reduced, and the grading swirling is separated from the center outlet under action, and is collected from the center outlet. Such a pulverizer, the motion of the particles can be decomposed into two components in two directions in the intersection. In one direction, the direction of movement of the particles is substantially consistent, and there is no significant impact pulverization effect, and only in the other direction, the particles are opposite, and the particles produce effective impact. Therefore, this impact of this intersection is limited, and the energy of ultra-high-speed moving particles is not fully utilized, so the production energy consumption is still high.
In the production process, Vertical Air Classifier for FishBone generates certain noise, the main reason for generating noise is: (1) When the coal mill is running, the operating part drives air generation. " Sleins Call: (2) Equipment Run. The sound of vibration is generated; (3), the rubbing between the turntable or the hammer and the drug; the rotating part itself is friction. For the cause of noise, the main solution is as follows: (1) for each rotating componentAdd lubricating oil, if the bearing and the shaft are misalign, adjust the bearing wear, replace the bearing; (2) The heat generated during the crushing process also generates noise, and cools the air cooling in the crushing chamber; (3) The damping of the devices such as damping pads.
