It is well known that the product technology of Multiple-Stage Classifier In Series for Calcite has been widely valued by the industry.
High-speed jet enters the crushing chamber, collides with particles, and many times in the friction of high pressure air, shear and pulverized, pulverized materials, and the assembly of rising airflow motion, under the action of the fan, In the power of the rotational speed of Multiple-Stage Classifier In Series for Calcite, the thickness of the material is separated from separation, the fine particle size of the graded wheel into the cyclone separator and dust removal, continues to be pulverized. The classifier produced by AlPa can perform local internal changes depending on the different characteristics of the material, so that it is more suitable for the grading requirements of the material. The grading machine has a greater amount of processing, energy saving, simple operation, and low maintenance costs.
Multiple-Stage Classifier In Series for Calcite features ultrafine pulverization for dry powder materials. The impact is large, up to 2.5 Mach. General materials are easily crushed to 1-10 microns. 2. Relative fluidized bed gas flow pulverizer has a good crushing effect on viscous materials, and the crushing process does not generate clogging materials that cannot be pulverized. 3, heating, grinding process due to compressed gas nozzles, temperature drop, no mechanical friction, the grinding process does not warm, break, suitable for low-melting thermal sensitive materials. 4, easy equipment, convenient cleaning, convenient operation and maintenance, small area, low noise, no vibration, and so on.
How to continue Multiple-Stage Classifier In Series for Calcite Life? Here are the following aspects: 1. In the production process, the temperature rise of the bearing must be regularly checked. When the temperature rises to 50 ° C, the inspection should be checked, find a reason, and troubleshoot the fault. 2. When the new machine is running, the transmission belt is easily stretched, and the tightness of the belt should be adjusted to ensure the life of the belt. 3. Regularly check the lifting parts, promptly guarantee the quality of production and production. 4, blade and bushing should always check the wear situation. When wear, the productivity is lowered, the grain is thick. 5, the host and gradient flow bearing oil grease lubrication, the use of special grease, and the degree of 265-295.6, and the change cycle of the bearing is 2000 hours. The amount of the grease is filled into a 1/2 (upper test) or 3/4 (below the test), so we can't add too much grease. Otherwise, the bearing temperature is too high. 7, the spiral feeder is 4,000 hours, plus ordinary calcium based grease.
