Because Pin Mill for Catalyst is widely used in all walks of life, the research and development of classifying machines at home and abroad attaches great importance to it. In the current market, there is a great development space.
Pin Mill for Catalyst is suitable for microfinishing machines of materials such as synthetic resins and instruments. It is different from the ordinary pulverizer. It is not only simply crushed such as impact force and cutting force, but also subject to a large amount of ultrasonic eddy current produced on the back of the blade and the vibration of high frequency pressure generated by the resulting material. Crushing can also be broken, viscous and elasticity under certain conditions. The raw material temperature of the machine increased, and the thermal material can be broken.AlPa Graphite PIN MILL for Catalyst Case Sharing: The customer is a research institution that needs to be superfined in graphite during its research. The PIN MILL for Catalyst our AlPa was finally selected through multiple incoming experiments.
Technical parameters:
Finished product particle size: D50: 10-30μm
Production capacity: 30-50kg
1. Before using the pulverizer, first check whether all fasteners of the machine are tightened and the belt is fastened.
2. The spindle direction must be consistent with the direction of arrow on the shroud, otherwise it may damage the machine and cause personal injury.
3. Check if the crusher is complete.
4. Check if the gas flow pulverizer has a hard object such as metal in a crushing room, otherwise it will damage the tool, affect the machine.
5. You must check the purity of the material before crushing. Metal hard materials are not allowed to avoid damage to the tool or cause combustion.
6. The oil cup on the machine should always note the full lubricant to ensure that the machine is operating normally.
7. Stopping before stopping. If you do not continue, remove the residers from the machine.
8. Regular inspection tools and screens are damaged. If damage is damaged, it should be replaced immediately.
9. There will be slight vibration when using the fuselage. Be sure to tighten the cover to connect the handle to avoid accidents.
If you still have questions, you can directly contact the ALPA Technology Co., Ltd., warmly welcome users to come to consult, our company equipment is manufactured, the size is complete, there is a suitable for you!
