With the continuous advancement of pulverizer technology, Rotor Mills of Low-Meiting Sealing Frits has been familiar with people. The most popular pulverized equipment is now the Rotor Mills of Low-Meiting Sealing Frits. It has a wide variety, available for laboratory, home and factory use. It has a wide range of production, high energy consumption, high automation, and high classification quality.
Rotor Mills of Low-Meiting Sealing FRITS is a high-speed airflow to form a high-speed air flow using multiple relative-arranged nozzles to achieve ultrafine pulverization. The crushed material enters the pulverizing chamber with the rising air flow, since the pulverized rotor is high-speed rotation, the particles are subjected to the centrifugal force generated by the pulverized rotor, and the center of heart is generated by the viscous action of the gas flow. When the centrifugal force of the particles is greater than the heart force, that is, the pulverized particle size The coarse particles return to the pulverizing chamber to continue the impact, fine particles flow into the cyclone separator, collectors, and the gas is discharged from the air.
Low temperature without media, ensuring high purity and physical properties of the product. The equipment runs no dust pollution in a negative pressure state. The full use of jet flow can increase the pulverization efficiency of 30% compared to conventional gas flow grinding machines, and the precision is higher.
ALPA equipment is small, and the structure of the pulverizer can be highly machined so fine powder, avoiding the wear of the horizontal crusher pulverized part, and the equipment of the equipment is used under the same material. Multiplier. Small granularity is wide, and the product particle size can be arbitrarily adjusted within 1-74um.
AlPA Phenolic Resin Rotor Mills of Low-Meiting Sealing FRITS Share: The company has a manufacturer of phenolic resin in its customers. The company has found a lot of powder equipment companies without suitable equipment. . Finally, we found our ALPA. After experiment, our company's product Rotor Mills of low-meiting sealing frits.
Finished particle size: D50 less than 5μm
Production capacity: greater than 50kg / h
Installation, operation and maintenance is to use Rotor Mills of Low-Meiting Sealing Frits Three important factors. The wear and consumption of each operation has always been a key factor in each startup operation. In order to use the airflow pulverizer for a long time, please adjust the open mode. The boot is the standard, for the first time to contact and use this kind of equipment, it is always a very strange state. In fact, it is very simple, the best way is to be familiar with the instructions.The consumer content or no use of value, timely specification and familiarity.After each startup, check the airflow pulverizer in time to develop good usage habits.In the future, we don't need to pay attention to and familiarize.
The company provides free experiments and testing, and provides 24-hour consultation services, welcome to use.
