Rod Pin Mills of Graphite Powder

Rod Pin Mills of Graphite Powder Technology is one of the important basic technologies in the modern industry. In the modern industry, the raw materials that require a powder state have a small and uniform particle size and higher purity, and ultrafine The raw material has changed, so that ordinary materials have a broader application range,

In addition to the particle size, there is a narrow particle size distribution, the particle surface is smooth, the particle shape, high purity, high activity , Good dispersibility. Since Rod Pin Mills of Graphite Powder generates a Juromon cooling effect in the compressed gas in the pulverization process, it is also suitable for ultrafine pulverization of low melting point and thermal material.

The gas-solid ratio in the pulverization process is an important technical parameter and important indicator. If the gas is too small, the kinetic energy of the airflow will be insufficient, which will affect the fineness of the product. However, if the gas ratio is too high, not only waste energy, but even the dispersion performance of certain particulate materials will also be deteriorated. When the particle size of the feed is pulverized, the particle size of the feed is more stringent.
When the titanium powder is pulverized, when the calcined material is pulverized, it is necessary to control 100-200 mesh; the material after the pulverization surface is generally 40-70, and cannot exceed 2-5 mesh.

AlPa Solid mannitol Rod Pin Mills of Graphite Powder case share: a food company requires large production of solid mannitol ultrafine powder. Many of the domestic powder companies have not found a crusher of the compound GMP standard food grade production. The general compound GMP standard pulverizer does not meet the large capacity required for the company. With our help, the company purchased 1 Rod Pin Mills of Graphite Powder of our company. The demand for the large production of solid mannitol is met, which is satisfied with the GMP standard.

Technical parameters:
finished particle size: mannitol: greater than 710 um 7.34%
Production capacity: Mannitol: 2T

Rod Pin Mills of Graphite Powder is a crusher Any mechanical equipment that has certain precautions before use, and must check the precautions to operate, minimize the damage rate, then what is the precaution before using a jet ball mill? Here are some introductions.

1. Check whether the firmware is tight before use, whether the spindle direction is correct, so as not to damage the machine.
2, the pulverizer should be lubricated in accordance with the requirements so that the machine is operating normally.
3, the material cannot be mixed before the grinding machine is added to avoid damaging the pulverizer.
4, the pulverizer does not have foreign matter or debris. If necessaryTreatment in time to avoid damage to tools.
5. When using the crusher, if there is abnormality, it should be handled immediately to avoid a large loss.
6. If damage should be replaced immediately, certain components should be checked regularly.
Shandong AlPa is a source manufacturer of Rod Pin Mills of Graphite Power Powder, which has provided equipment for domestic and foreign customers, welcome to inquire!