With the development of the times, the progress of society, the development of the market is elegant, and more and more manufacturing have to accelerate innovation, some transformations, some continue to improve the technical level of the product, to adapt to the development of the market, Meet the customer's picky requirements. In the case of continuous changes in the market, only constantly innovation, continuously improve your technical level, and constantly improve your own products, in order to make the airflow classifier industry have a broader development space.
During the production process of crushing using Impact Mill of Graphite / Resin, the ultrasonic air flow generated by the equipment can constantly collide between the materials, and this supersonic airflow can also be used for raw materials. A good impact is produced, and then the material can also achieve a good crushing effect with the inner wall of the equipment.
ALPA Slag Impact Mill of Graphite / Resin Case Sharing: The customer is a steel slag reuse technology company, which is mainly engaged in steel slag sorting project. Through the experiment, our AlPA classifier reached customer needs. Product particle size: D80: 23.4
Yield: 175kg / h 加 加 加
1. Preliminary on hierarchics, fan and other host equipment Inspection, there is an organic damage after transportation or long-term storage, see if there is no abundance in the device and the fan airway, turn the hierarchical impeller and the wind turbine spindle, and observe whether it is flexible.
2. Check the degree of fastening of the equipment pre-installed components, and must be added to the lubricating oil to be lubricated.
3, the mounting grading wheel should strictly prevent collision, classify the host, and the fan should be tested, and the level is specified by the gasket, and there is a basic requirements and the foundation fixation.
4, require the sealing pipe interface to configure the sealing gasket.
5, after the layout machine is installed, first observe the direction of grading motor.
6. When the control cabinet is installed, the corresponding relationship between the terminal sequence number and the equipment is carefully verified.
7. After the installation is completed, the first empty car is running 1-2 hours, and it is easy to securely check the accuracy and coordination of the equipment action at any time.
