We all know that Vibration Grinder of Fesicr is a strong airflow crushing equipment, and many stubborn hard materials have been cut into a uniform block of one by one,
Vibration Grinder of Fesicr is simple, but it is very powerful, and it is usually very good to use Vibration Grinder of Fesicr. Its design is simple, easy to operate, easy to clean.
ALPA Carbon Vibration Grinder of FesicR Case Sharing: The company produces superfine and super fine pulverized in the production of static pressure graphite. After multi-party investigation and experiment, finally selected our AlPA as a cooperative customer, we provide the Vibration Grinder of Fesicr provided by it to meet its needs of carbon pulverity, particle size, yield, and so on. Technical parameters:
finished particle size: D65: 200 目
Production capacity: 800-1000kg
1 , Newly installed equipment, it is inevitable that iron blocks, welding bales, weld slag, etc. In the absence of the fan and the main motor, open the implicit baffles under the feed port, allowing impurities and washing materials to be discharged from here. After the end, open the ultrafine pulverizer observation door, check whether there is impurities in the pulverizer, hammer head and ring gear have problems.
2, before checking everything is normal, the power-on starting the device, check the direction of rotation of all motors.
3. Parameter inspection setting for the two inverters of the ultrafine pulverizer's feed motor and the graded wheel motor, check if the air open, contactor, heat relay, overcurrent relay adjustment is appropriate? Return all lines all over again.
4, check whether the solenoid valve is blown normally, regulate the dust collector solenoid pulse width and blow interval.
5. Check if the cleaning of the cleaners under the brake dragon has a leakage, can be placed in the interface with the hand or fine powder, there is a feeling of suction, if there is a sealing treatment. After all of the above tests are normal, prepare the material production.
