Rod Pin Mills for Buckwheat Husk is a very common and common pulverizer. It has a wide range of applications involving many industries.
Rod Pin Mills for Buckwheat Husk is affixed to the powder industry. Rod Pin Mills for buckwheat husk is a supersonic gas stream with compressed air, filtered, dried, and is injected into the pulverizing chamber. Accelerated materials gather in the intersection of multiple nozzles jet gas flow, resulting in severe collision, friction and shearing, thereby achieving ultrafine pulverization of particles. Air flow grinding has the characteristics of low energy consumption, stable operation, simple structure, convenient operation and maintenance. It is real multi-purpose, high efficiency, low-cost new crushing equipment. It can be said that modern industrial production is inseparable from airborne flow, but air flow milling equipment often requires continuous operation, long working hours, which is greater than the equipment itself is large.
ALPA Sulfite Rod Pin Mills for Buckwheat Husk case Sharing: This customer is a Saudi company, it is necessary to grade the potassium sulfate ultra-fine powder, and investigate the international powder equipment company, and finally chose our alpa. Grading machine equipment.
In the production process, the temperature rise of the bearing must be often checked, and when the temperature rise exceeds 50 ° C, it should be closed, and the reason is to trigger the failure. When the new machine is running, the drive belt is easy to elongate, pay attention to adjust the proper looseness of the belt to ensure the work life of the belt. If the lifting piece should be checked frequently, replace the production quality and production in time. The blade, the bushing should often check the wear situation. If the wear is worn, the productivity decreases, and the particle size is roughly discovered to be replaced. The host and the grading flow bearing are lipomatic lubrication, using special lipids, the replacement period of the bearing is around three months, and the filling of the grease is 1/2 of the interior space in the bearing cavity. Otherwise, It will cause too high of the bearing temperature. The spiral feeder has changed the lipid period of half a year, and Cape Calcium-based grease. In the output shaft E, ie the pulley E, avoiding the weight of the weight, damage the part. It is strictly forbidden to turn the handle on the stop. The lubricating oil used in this regulator is used with N32 alkaline high-zinc high-grade anti-motor oil pressure oil, and the deceleration machine is 401 generally lubricating oil, and it is not necessary to use other machines. After four or five months, new oil should be replaced.
Welcome everyone to visit Shandong AlPa website, company specializing in the production and development and service of Rod Pin Mills for Buckwheat Husk product technology, high-energy technical experts, professional after-sales service team, solved the worries of customers.
