Hammer Crusher For Methanol Cellulose is well balanced, only need to be produced in a smooth ground place, and low noise, which can avoid dust leakage during the pulverization process, favored by the powder industry.
What is the design structure of Hammer Crusher for Methanol Cellulose?
Under the action of the high-speed rotary impeller, the gas pressure flowing through the impeller increases, and the high pressure airflow flows out of the impeller, the fine particles are ejected. Since the blade of the rotary vane is designed as a bending, the inlet is large, the exit cross-sectional area is small, so the airflow pressure at the outlet is reduced, the speed increases, and the rotational flow is conducive to classification.
The grading point adjustment mechanism sets three adjustment rods and keeps its synchronous motion using the chain. When the adjustment rod moves up, the fine powder increases; when the adjustment rod moves down, the fine powder is reduced. The grading point can be continuously adjusted, and the granularity of the Hammer Crusher for methanol Cellulose can be adjusted. The granular weight of the grading weight can reach D97 ≤ 3 ≤ 150 microns, which is suitable for fine grading of dry micrometer products.
The setting of the control ring is to ensure that the control ring is formed between the control ring and the radial particles ring, and the stability of the airflow flow is controlled. The residual windlet inevitably introduces excess gas from the dry material, the temperature of the classification chamber is high, and the air can expand, and therefore designed a residual tightening to maintain the stability and balance of the graded indoor airflow.
ALPA Xiashi Powder Hammer Crusher For Methanol Cellulose Experiment: A mining company needs to be sorted by Xialuden powder. Through the experiment of our ALPA can do product granularity: D90: 16.8 μM, production: 246kg / h 加 加
Welcome to the majority of major manufacturers in Xixia stone powder to visit, and collective experiments.
Ultra-micro Hammer Crusher for methanol Cellulose debugging before debugging:
1, newly installed equipment Foreign objects such as slag. In the absence of the fan and the main motor, open the implicit baffles under the feed port, allowing impurities and washing materials to be discharged from here. After the end, open the ultrafine pulverizer observation door, check whether there is impurities in the pulverizer, hammer head and ring gear have problems.
3. Parameter inspection settings for the two inverters of the feed motor and the grading wheel motor of the ultrafine pulverizer, Check if the motor has a vacant, contactor, and hot relay, and overcurrent relay adjustment is appropriate?Return all lines all over again.
4, check whether the solenoid valve is blown normally, regulate the dust collector solenoid pulse width and blow interval.
5. Check if the cleaning of the cleaners under the brake dragon has a leakage, can be placed in the interface with the hand or fine powder, there is a feeling of suction, if there is a sealing treatment.After all of the above tests are normal, prepare the material production.
Shan Dong Alpa is a scientific and technological private enterprise that produces various airflow pulverations, airflow mill, medical and air flow crushers, disc air thrower, and needs to purchase such products.Users can contact us.
